When the person’s eyes are related to correct judgments and behaviors, of course, the lights of the electric advertising vehicle are also the eyes of the vehicle, and it is also possible to directly express some driving intentions to the driver. Especially when driving a car at night, the lights can improve the safety of driving. Electric advertising vehicles are very important for the maintenance of the lights. At the same time, we must master the techniques of checking the lights and some of the malfunctions of the light bulbs so that they can be replaced within a short time without affecting the journey. But before that, we need to have a better understanding of the lights of electric advertising vehicles so that we can use them flexibly and correctly.

1. If it is a long-term pilot driving an electric advertising vehicle in the evening, it is necessary to replace a pair of relatively bright headlights, so that at night it will be able to have enough light to see the details on the road. You can look farther when you open a sightseeing tour. If conditions allow, electric vehicle owners can also install xenon headlights for their vehicles. In fact, the power required for xenon headlamps is also very good. The power consumption is only those ordinary halogen bulbs. One-sixth, as long as the converter is more than 80W, then there is no problem, the main thing here is that when installing a single light, do not be far and near one light, not to lead the battery of the electric car battery box. A separate battery line connects the xenon headlamps. This is a great harm to the battery.

2. The tail light of an electric advertising vehicle is actually very important. When the rear light of the electric advertising vehicle is in trouble, it will be relatively easy to attract the rear-end accident. Under normal circumstances, if there is no failure of the taillights of the vehicle, the actual situation of upgrading the taillights will not be many. In addition to the need to add some personality to the safety and transparency of the taillights, the use of LED It is also good that the light bulb is replaced by a traditional light bulb. The LED light will increase in brightness, and the response time will also be shorter than the traditional light bulb. This means that if you will After the car's brakes are depressed, the LED brake lights are older than those ordinary lights.

Whether it is the back lamp or headlight of an electric advertising vehicle that is not lit, it is proved that the vehicle's light bulb has burned out and it must be replaced in a timely manner. If the light bulb is not completely broken, it is only that the brightness of the light bulb has decreased, and the light is also dark and red. This kind of situation cannot be relaxed. Because in this case, that is, the smell is malfunctioning, reducing the lighting capacity of the electric advertising vehicle will cause a great potential safety hazard. There are several reasons to reduce the brightness of the car bulb. The most common reason is that the mirror or the astigmatism glass on the luminaire has dirt. At this time, you only need to clean the dirt with a clean velvet or lens paper. . The second reason is that the charging capacity of the battery of the electric advertising vehicle has decreased, and the lack of power has caused the brightness of the vehicle light bulb to be insufficient. In such a situation, the battery needs to be replaced.

2.5 Inch FRP Pressure Vessel

End Entry Design

2.5 Inch FRP Pressure Vessel

2.5 Inch FRP Pressure Vessel,2.5 Inch FRP Housings,Small FRP Pressure Vessel,2.5 Inch Fiberglass Pressure Vessels

HEBEI CHENGDA HUAMO TECHNOLOGY CO.,LTD , https://www.chengdapipe.com