As a car owner, you must understand that the car needs "seven maintenance, three repairs". Good maintenance habits can make the car run better and reduce the occurrence of malfunctions. Although it can not make the car always young, it can greatly extend the car. The service life. Can be a lot of real life in the car owners still lack of maintenance common sense, not only did not play the role of maintenance, but also brought a lot of damage to the car. The following small series will introduce you to several common waste phenomena in vehicle maintenance and repair . The first waste: The tires are to be imported. Some people buy tires especially like to emphasize "imports", and Mr. Chen, who plays cars, is like this. However, after several experiences, Mr. Chen found that the new tires introduced abroad are not suitable for domestic users. On one occasion, his new tires only ran a mountain road, and the tires began to pack. The level of pavement in foreign countries is quite different from that in China. Imported tires do not necessarily perform well on domestic roads, especially the impact resistance of the sidewalls is obviously unacceptable. After the domestic joint venture production of some foreign brand tires, a layer of cord fabric was added to the side of the tire according to the domestic road conditions, which greatly enhanced the impact resistance of the sidewall. The joint-produced tires can completely replace the imported goods in performance. And the price is more affordable. The second kind of waste: Pursuit of high-grade gasoline. I think that the higher the gasoline label, the better Mr. Zhang, because he loves the new car, he has been adding 97# gasoline to his car for two years. General car owners know that if high-end cars use low-grade gasoline for a long time, in addition to knocking, problems such as power reduction, fuel consumption rise, and internal engine parts damage will occur, which will seriously shorten the life of the engine. Therefore, many car owners like to use high standard oil. In fact, the higher the gasoline label is, the better. Even a high-end car does not mean that the standard oil must be raised. The third kind of waste: Too much oil. The new car of the owner, Xiao Wang, just passed the first insurance of 5,000 kilometers. When he learned to watch the engine oil ruler, he ran a speed of 2,000 kilometers when he was afraid of the oil. He was afraid that the oil would not be enough. He added a bottle of oil from a friend. . Who knows not long after, his new car began to burn oil. This is because Xiao Wang’s new car has too much oil. When the engine is working, the crankshaft handle and the big end of the connecting rod will produce severe agitation, which increases the internal power loss of the engine, and also increases the oil splashed on the cylinder wall, causing the burning oil to malfunction. It is better to control the oil in the engine oil sump between the upper and lower scribe lines of the oil dipstick. The fourth waste: Maintenance is too "diligent." Miss Zhao is a car blind. She often receives the maintenance information sent by the dealer. The new car has only opened 8000 kilometers. Miss Zhao’s oil has been changed 3 times. The machine filter has also been changed 3 times. The maintenance interval is 3,000 kilometers. To. The car maintenance cycle refers to the interval or time of car maintenance. High maintenance frequency is not a bad thing, it can more effectively protect the performance of the vehicle, but it is not necessary too often. Scientifically determining the interval between various maintenance operations can keep the car in good technical condition and save maintenance and repair costs. These are some of the wastes that Beimai.com has summarized to summarize the car maintenance. Do you understand? Car maintenance is a good thing, but we must also carry out reasonable and effective maintenance. Do not let any incorrect maintenance give us The car brings damage and cares with one heart and one mind to ensure the normal operation of the car and the driving comfort.
Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flow-chat of Batch Waste Plastic Pyrolysis Plant
Advantages of Batch Waste Plastic Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Plastic Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Batch Waste Plastic Pyrolysis Plant Batch Waste Plastic Pyrolysis Plant,Fuel From Plastic Waste,Plastic To Oil Machine Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com