Dongfeng sprinkler will use the body for a long time will rust do not know if you have noticed it

The time spent on the Dongfeng Sprinkler is often rusted on a long paint surface. In addition to common collisions and scratches, the small stones bounced up by the tires on the paint surface will also cause the paint surface to peel off. Point, a long time will produce a small rust. These small scars are easily overlooked because they are mostly inconspicuous, affecting both the appearance and the maintenance of Dongfeng sprinklers. Careless Dongfeng sprinkler customers are often not concerned, this is not good! If you go to a car beauty shop for these things, it's a little too much for extravagance!

So I have to teach you some practical and convenient methods:

Paint pen can deal with small scratches: If the corrosion is not very serious, you can first use a very fine water-sandpaper to dip water to gently rub off the rust, but do not avoid non-directional grinding, to the same line to sand. After thoroughly wiping, apply a primer. If it is a new scratch, it can be applied directly with a primer. Afterwards, if the Dongfeng sprinkler is equipped with a small tank of original paint, it can wait for the primer to dry, and then polish it with water-based sandpaper and coat the original paint on top of the primer. If you do not have the original paint, you can buy a makeup pen and paint it with a paint pen. Although this kind of treatment does not have a good effect on the treatment of the beauty shop, if it is a small or unnoticeable scar, it can also prevent the rust from being enlarged and aggravated.
Toothpaste can be temporarily rust-proof: there is a common toothpaste to deal with. When new scars are found, apply toothpaste to the scratches with a light wipe. After raining or washing your car, don't forget to paint it again. In general, this can reduce scratch marks, and it can also simply act as a barrier to prevent rust. There is no problem in the short term. Especially white paint, the effect is most obvious.

Electric Wire Stripper

M-1 Output Cover Type


Power supply 230V-50HZ,2.2KW


Measurement L620*W600*H840


Weight 100KG


Daily Output 400-1000KG


Processing diameter at 1-45mm cable wire


Wire stripping capacity 35 meter/minute


Steel rolls 4sets.


Blades 15 pieces


Slots 11 pieces


We supply Cable Stripping Machine such as automatic cable stripper, Rubber Cable Stripper and so on.

We come up with this wire stripper that is fast and user friendly. This wire stripper will cut 90 % of your time in stripping your wire.


The recovered copper or aluminium,can be sold to a smelting plant.Remember to watch the price of copper daily this will maximize your revenue.

This machine Specifications:

*It is compact,yet easy of access,practicable and easy to handle,has unique price/performance ratio.

*It has reliable performance,easy to move, place and install.

*This cable stripper is simple to operate without the need for constant adjustment to suit different material sizes.

* Proprietary hardened tool steel blades.

*It is s simple yet efficient machine and requires very little service and maintenance.Only need blade changing and lubrication if necessary.

*It is a totally-enclosed type machine,has side guards cover the pulley and belt system,ensure the operator`s safety.

Recovers the Conductor Material from Cable and Wire.

Make sure the cables/wires`diameter are similar with the feeding slots ,


large cables/wires in large feeding slots,small cables/wires in small feeding slots,flat


Cables/wires in flat feeding slots.

Cable Stripping Machine

Cable Stripping Machine, Scrap Cable Stripping Machine, Electric Cable Stripping Machine, Copper Cable Stripping Machine,Automatic Cable Stripper,Rubber Cable Stripper

TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , http://www.scrap-wire-stripper.com