Recently, Pirelli Tire International held an international media conference in Valencia, Spain, the venue for the 2012 F1 Grand Prix Europe, to announce the launch of its new Cinturato P7Blue tires.
Our main products are plastic Commodity Mould such as Chair Mould , Table Mould, Basket Mould, Crate Mould , Bucket Mould and Other plastics products molds. We continuously accumulate the experience of plastic injection mold making. With more than 10 years experience, we are skill of making many kinds of plastic injection molds with internationally advanced level.
Bucket mould specifications (For reference)
Bucket Mould cavity: 1-2 cavity
Bucket Mould material: S45C, P20, 718, 718H, 2738, 738H, NAK80, SKD61,
E420, Beryllium etc. (For Reference)Pail Mould Base: LKM or Self-made.
Hot Runner: YUDO, HASCO,M-H-R, etc.(For Reference) Mould Components:
HASCO, DME, PUNCH, JINHONG,etc.(For Reference) Paint bucket mould Design
software:UG, PROE,CAD, Solidworks
Bucket Mould Bucket Mould Taizhou Huangyan YouGo Mould & Plastic Co., Ltd , http://www.plastic-moulds.com
According to reports, this tire is Pirelli’s first product to receive Europe's “new tire labeling system†A/A (rotational resistance/low road braking force) rating.
As a new member of the Pirelli Cinturato family, the Cinturato P7Blue, like the older tires of the series, is suitable for medium and large-capacity limousines and is currently available on the European market. However, according to reports, the difference in new products is that they currently only sell for the aftermarket.
Official data shows that the Cinturato P7Blue tire has a short braking distance and low rolling resistance. Compared with Class B tyres, the braking distance is shortened by 2.6 meters; compared with Class C tyres, the rolling resistance is reduced by 23%. It is estimated that these two breakthroughs can save fuel by 5.1%.
Cinturato and PZero are Pirelli's most representative two series of high-end tire products. Given consumers' preference for high-tech and high-quality products, the core of Pirelli's high-end product strategy is to improve tire safety and reduce energy consumption.
Yougo mould has the expertise to develop and supply all kinds of bucket moulds to clients overseas. Bucket moulds include paint bucket mould, water bucket mould or call pail mould. We have a team of expert designers for designing very good bucket and we regularly develop bucket moulds for manufacturers worldwide. Our moulds are made of high quality steel and all required branded spare parts can be supplied from time to time. For all our bucket moulds we assure very good mould life for production. Are you looking for well designed Plastic bucket moulds.
Paint Bucket Mould
With short cycle time(<30 SEC)
Beryllium insert for the core top and cavity neck
Optimization layout for quick air ejector
Optimization layout for cooling system
Full arrange from 0.5L-25L
Pail mould technical points explanations.A. The explain regarding the
pail mould core eccentric causing the pail wall thickness not even and
out of center.1. If the cooling is not equal in the different area of
the pail mould core and cavity, this will cause the following difference
of the melted material, the more hot area flow will be bigger and the
colder area the flow will be smaller. Then the hot area's pail wall
thickness will be thicker. The temperature difference normally caused at
least 0.05mm...
2. Normally, the interlock height of bucket mould should be 20 to 30%
of the plastic bucket's height, for example the smaller bucket should be
20%, the bigger bucket mould should be around 30% height.3. The
machining process is meaning which kind of machining should we select
and what we should take care when we make the machining to the pail
mould core and cavity.
Injection bucket mould Runner system: 1point pin-point gate/cold-runner
Bucket mould Ejection system: stripper plate from the injection side
Bucket Moulds running: full automatic
Bucket Mould life:500,000-1,000,000 shotsBucket mould Payment Terms:
T/T or L/C Plastic Mould After-sales Services: Experienced plastic mould
engineers will provide all-round technical solutions to any problems
occurred in customers' mould operation. China bucket mould maker
Features:High efficiency, short delivery time, competitive price.
Customer provide the 2D or 3D drawings in DXF, DWG, PRT, SAT, IGES,
STEP format etc, or just send us the sample. We will scan the sample and
make product blueprint, begin to design the mould assembly drawing
after customer's confirmation, and we customize the existing projects.