Auto Parts (auto parts) constitute the
entire automotive respective units and services in the car of a product.
With the auto parts processing market
competition becomes more intense, deeply rooted concept of environmental
protection, as well as escalating technology and applications, international
auto parts Machining Parts industry in recent years, showing the development of
the following characteristics:
â‘ auto parts processing systems supporting
the modular supply trends in the ascendant
â‘¡ auto parts procurement process of
globalization
â‘¢ auto parts processing industry transfer
speed
Many kinds of auto parts, car brand is now
more and more, more and more types of vehicles. Commercial vehicles and
passenger cars can be divided into two types, which refers to a passenger
vehicle less than nine seats to sit (including the driver bits), with the
primary purpose passenger vehicles. Specifically, the passenger car that is
divided into the basic passenger car, MPV car, SUV and other vehicles such as
pickups and other vehicles.
Commercial vehicle means more than nine
seats (including the driver bit) or as cargo for the main purpose of the
vehicle. Also divided into: passenger cars, truck, trailer, bus non-complete
vehicles, non-complete vehicles laden.
Procedure
Casting ,Die Casting, forging, stamping,
machining,injection
Products type:
Engine Parts
Head, body, oil pan, etc.
Crank Mechanism: pistons, connecting rods,
crankshaft, connecting rod bearing, crank watts, piston rings, etc.
Valve: camshaft, intake valves, exhaust
valves, rocker arms, rocker shafts, tappets, Putters
Intake system: air filter, throttle, intake
resonator, intake manifold, etc.
Exhaust system: three-way catalytic exhaust
manifold, the exhaust pipe
Transmission parts
Flywheel, pressure plate, clutch,
transmission, gear shift control mechanism, drive shaft (joint), wheels, etc.
Brake System Parts
Brake master cylinder, brake cylinder,
vacuum booster, brake pedal assembly, brake discs, brake drums, brake pads,
brake hose, ABS pump, etc.
Steering System Accessories
Knuckle, steering, steering column,
steering wheel, steering rod, etc.
With the Department of accessories
Rims, tires
Suspension class
Front axle, rear axle, swing arm, ball
joint, shock absorbers, coil springs, etc.
Ignition System Accessories
Spark plugs, high voltage, ignition coil,
ignition switch, ignition modules, etc.
Fuel System Accessories
Fuel pumps, fuel lines, fuel filter, fuel
injectors, pressure regulator, fuel tank, etc.
Cooling Accessories
Pumps, pipes, radiators (water tank),
radiator fan
Lubrication System Accessories
Oil pump, oil filter, oil pressure sensor
Electrical instrumentation system parts
Sensors, lighting category, ECU, Switches,
air conditioning category, Harness, fuse type, motor type, relay type, class speakers,
actuators class
Lamps decorative lights, fog light,
interior lights, headlights, front turn signals, side lights, rear combination
lights, license plate lights, all kinds of light bulbs
Switches
Combination switch, window switch,
temperature control switches, etc.
Air-conditioner
Compressor, condenser, dry bottles, air
conditioning pipes, evaporation tank, blower, air-conditioning fan
Sensor category
Water temperature sensor, intake air
pressure sensor
We supply big range of such auto parts.
B.
Main particulars
MAIN
PARTICULARS
Material
Carbon
steel(20#-60#, S235-S355-), Alloy steel(4140,4340,42CrMo, -), Powder metal, stainless steel, aluminum alloy, zinc alloy, brass, gray iron,
cast iron, ductile Iron or other specified
Standard
ASTM, ASME, DIN, JIS,
ISO, BS, API, EN
Certificate
ISO9001
Tolerance
Up
to +/- 0.002mm
Dimension
As
per drawing, as large as we can
Processing
CNC
turning, CNC turning and milling compound processing, 3/4/5 axis CNC
machining center, wire-cutting, EDM, grinding etc.
Finishing
surface
Machined
surface with oil, blasting and painting, anodize, polishing, powder painting,
electrophoretic coating-
Marking
as
per clients` requirements
Inspection
material,
construction, dimension, heat treatment, hardness, NDT
Quality
ISO9001,
PPAP control production
Lead
time
3-20
days for sample, consult with customer for mass production
Delivery
Express
for sample, ocean shipping/air for mass production
Our
Capabilities
CNC
machining, CNC center machining, drilling, milling, turning, grinding,
tapping, boring
Engineering
& manufacturing services
R&D
process, tooling and gauging design, product design
Integrated
CAD/CAM system, test and measuring
Others
Recyclable,
in line with environmental requirements and standards, and reliable
C.
Construction
Construction
by casting, forging stamping, injection and machining
D
Workmanship
The
workmanship have good production practice. Care are taken to ensure High
accuracy and smooth surfaces
E.
Certificates
- Material
certificates
-
Measuring reports
-
Inspection protocol
-
NDT reports
-
Fixed certificate: ISO9001 certificate
The photos of our Auto Parts
Our
service
Besides
above the general specifications, we can also supply some specific machining
parts as clients' requirements.
Package
and shipping
Export
cartons, pallets, wooden cases, Polybags
container
package and container transportation
Auto Parts Auto Parts,Auto Machining Parts,Automotive Body Parts,Auto Car Parts Shinvast Industry Ltd , https://www.shinvastindustry.com
Recently, there have been "three shortages" in China: coal shortages, electricity shortages, and oil shortages. In fact, coal, electricity, and oil cannot keep up with demand. Some of them have attributed the formation of the “three shortages†to the rapid development of high-energy-consuming industries such as steel, real estate, and automobiles. In any case, the emergence of the "three wastes" is indeed a serious warning to the ambitious auto industry. Before the mid-1990s, the auto industry was constrained by bottlenecks such as raw materials, energy, and funds. With the starvation market in sight, the emergence of the “three wastes†has allowed the automotive industry to re-memorize the era of resource shortage.
It is worth noting that the "three shortages" are not short-term problems. According to the “National Electricity Market Analysis Report†released by the National Grid Corporation’s electricity market analysis and forecasting group, the overall power supply and demand situation in 2004 will be more severe than in 2003. By 2005, the nation’s electricity supply and demand situation may start with tension. To ease the basic balance of electricity supply and demand throughout the country in 2006. (This prediction may still be very optimistic!) Many local governments predict that the “electricity shortage†will also occur in the next few years.
On the surface, the lack of power supply, rapid economic development, the rapid expansion of high-power-consumption industries and persistent high-temperature and drought are the main factors that cause China's lack of electricity this year. However, it is precisely the energy system problem that is actually exposed by the “three wastesâ€. China's energy industry is undergoing a difficult transition from a planned economy to a market economy. The coexistence and wrestling of the two economic models has made it difficult for China's energy chains to have problems. For example, the price of electric coal, the problem of inter-provincial power barriers, the monopoly of the petroleum and petrochemical industries, and the coal transportation and sales of the Shanxi Provincial General Logistics Corporation are still the subject of unified agency. Due to the existence of such deep-seated problems, we cannot expect energy problems. Resolved in the short term.
Then, the "three shortages" will have a major impact on the development of the auto industry and the auto market. First of all, the phenomenon of “opening three stops and four stops†will reappear, so that the production arrangement will have no alternative but to dismantle the power supply bureau, and the entire production plan will be completely disrupted; secondly, “three shortages†will bring energy prices. Rising, rising energy prices have not only increased the cost of auto production itself, but also increased the prices of the upstream industries of the auto industry, such as steel, non-ferrous metallurgy, and parts and components. This has made companies accustomed to attacking the market with price cuts to make every effort. There is room for manoeuvre. In fact, the price increase for steel has long since appeared. The automaker shifts this burden to suppliers. This is possible in the short term, but it cannot be maintained in the long term. Third, the rise in oil prices is a measure of private car consumption. Nightmare, because the cost of keeping a car was high, and now it is fueling fire, which may lead to a decline in car sales or at least a slowdown.
Looking at the current situation, the huge planning of the 10 million automobile industry may be choked by the energy crisis. At the same time, local governments are now enthusiastic about the development of heavy chemical industry, making the demand for energy rapidly increase. The development of the automobile industry must pay attention to this issue.
View related topics: increase millions every year, analyze the production and sales of automobiles (commercial vehicles)
