The dust collector cannot work with a damaged dust bag, otherwise it will accelerate the scrapping of the dust collector. For the pulse bag filter, once the dust is removed from the bag, the dust is lost. For damaged bags, if a small area of ​​the bag is damaged, the hole can be filled with an old cloth bag or a new filter cloth of the same material. The hole filling method is to use a silicone rubber compound for bonding, as long as the adhesive is used. The chemical properties can be adapted to the process conditions.

When the bag is damaged in a large area, it must be completely replaced. Also, if the bag is blocked by fine dust, it should be replaced if it cannot be completely cleaned. To stop the dust collector when replacing the bag, first remove the bag cage, and the spring ring on the upper edge of the bag is pinched into a concave shape, and the bag is pulled up.

As the main accessory of the dust bag, the bag plays a key decisive role in the dust treatment process. Due to the grinding force of the dust, the bag is gradually worn out, which causes the wear of the bag mainly due to high temperature, deterioration of the filter material and corrosion of chemical substances, dust itself, changes in system capacity, etc., which cause wear of the dust bag.

Dust bag replacement and installation method:

When installing the bag, be careful and careful. Do not let the bag collide with the sharp object and hook it. Even small scratches will shorten the life of the bag. The method of installing the bag is to first put the bag into the room from the hole of the box flower plate, then pinch the spring on the upper part of the bag into a concave shape, put it into the flower hole plate of the box body, and restore the spring ring, and finally the bag cage Gently insert from the mouth of the bag until the cover on the top of the bag is pressed against the hole in the plate. In order to prevent the bag from being trampled, it is required to install a bag for each bag.

How to install the bag when the dust bag is working:

For example, when replacing the bag of the dust collector, and the dust collector can not stop working, then we want to replace the cloth bag, firstly separate the separate room lines, then replace the cloth bag with the compartment, the isolated room should be closed by the poppet valve. State while the pulse valve is not working. When disassembling the bag, due to a small amount of negative pressure on the bag mouth, be careful not to drop the bag into the ash hopper.

Laser cleaning is the process of using laser to removing contaminants, such as rust, oil, oxides, etc., on steel and other surfaces . Laser cleaning is achieved through laser ablation. It allows the selective removal of the contaminants with little impact on the substrate. Why we need a Laser Cleaning Machine ?

Compared with old method  such as dry-ice blasting, media blasting or cleaning using chemical solvents, we can remove many unwanted side effects by using laser cleaner. For example. if you use chemical solvents, it will produce a high amount of waste during process. if you use dry-ice blasting,  the process will be very noisy and not efficient.  Laser cleaning is a non-contact and non-abrasive process. It using laser light to blasts off the material from the surface layer. The process can be repeat , finishing surface is very clear. laser cleaning has same even better result compared with traditional method but the way in which the actual operation is completed is what makes laser cleaning different. Safer and more environmentally friendly

Cleaning Machine

Cleaning Machine,Laser Cleaner Machine,Laser Cleaning Rust,Laser Cleaning Tool

Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com