Diesel engine diesel engine knock and valve clearance \ fuel quality and so on!
Knocking is a very detrimental phenomenon for diesel generator sets. The main harms are: engine power reduction, fuel consumption increase, and noise increase.
The detonation of a diesel generator is actually a phenomenon in which the rate of pressure increase during combustion is too high. This phenomenon is caused by a long delay, a rail pressure, an excessively large advance angle, etc. This causes the maximum burst pressure of the engine to increase. The mechanical load on the body and the cylinder head increases, and the piston and connecting rod are exposed to the impact of gas combustion, which may cause the connecting rod, piston ring, and cylinder head bolt to break.
The above is a general solution to the knocking of a diesel generator set. If you need Ito's technical support, please call
Related reading :
Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine
CNC Oscillating Knife Cutting Machine
Concepts:
Oscillating Knife:
Oscillating Knife cutting has the advantages of small cutting force, low
cutting heat, high surface quality of the workpiece, easy chip
handling, improved tool durability, stable processing and high
production efficiency.
CNC VISION SYSTEM: CCD Vision Cutting system contains two operating
modes: direct cutting mode and photo processing mode. Therefore, the
processing route manufacturing steps
Differentiate: Direct cutting does not need to draw a photo point, and
the tool path file for drawing a photo point can be processed through
the buttons on the interface.
INDUSTRIES:
Sign and Graphics, Digital
Printing, Packaging, Automotive, Recreational boat, Exhibits, and
Fixtures, Sign Making, Gasket Materials, Arts and Crafts, etc.
MATERIAL:
Carpet, Felt, Foam, Closed
Cell Foam, Fiberglass Insulation, Composites, Gasket
Materials, Rubber, Fabric, Honeycomb Cardboard, Single-ply
Cloth/Fabric, Corrugated Cardboard/Paperboard, Vinyl
Veneers, Snowboard, Corrugated Plastic, Leather Goods, wood veneer for
inlay/marquetry artwork, Carbon fiber pre-preg laminates for aerospace,
military, and automotive components i.e.
Why choose Oscillating Knife Cutting Machine
-
Advanced Weihong 53C+TROCEN control system, easy and precise operation;
-
The heavy duty thickened bed is welded by square pipe, side hanging
-
structure, heavy column, 150*200mm gantry;
-
Patent type 1:8 reducer;
-
Has the advantages of small cutting force, low cutting heat, high
surface quality of the workpiece, easy chip handling, improved tool
durability, stable processing and high production efficiency.
-
The high precision CNC Oscillating Knife Cutter can induce draft separately and easily cut small pieces.
Main features:
-
Working area: Could be customized(1300*2500mm; 1500*3000mm; 2000*3000mm etc.);
-
Voltage: 220-420v, 3phase, 50-60hz;
-
Spindle:3.5kw air cooling spindle and Oscillating knife+CCD camera;
-
X Axis & Y Axis System: Germany ASK/PMT/GC-HIWIN 20 linear
guide+Flange slider+Precision 1.25module helical rack+Patent type
reducer structure 1:8
-
Table: Vacuum & T-slot table;
-
Precision machined aluminum parts, using aviation aluminum T6061/6063 material, CNC processing center precision manufacturing.
Oscillating Knife Cutter With CCD
Oscillating Knife Cutter With Ccd,Oscillating Knife Cutter,Cnc Router With Oscillating Knife,Oscillating Knife Atc Contour Cutter
Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com
