I do not know if you have heard of oil seals, or you may have seen them but did not know its scientific name. Now Xiao Bian came to tell the readers. Oil seal is a kind of mechanical element specially used for oil sealing, or other liquid that can be easily leaked. It also separates the part that needs lubrication from the main output part of the transmission, so as not to let the oil leak out. There is a representative form of oil seal, we call it TC seal, what does that mean? It is a rubber-covered, double-lip lip seal that comes with an elastic mouth. Most of life uses this. The same is true for the oil seals on the dump truck. The oil seal is essentially a rubber band, but the material of this rubber band is very particular, because after all, it must have a certain degree of tightness, and the material should not be too hasty, mainly fluoro rubber, Silicone rubber, polyurethane and so on. When choosing the oil seal, it is necessary to determine the size and material of the oil seal to be used according to the actual working temperature and the working medium to ensure the efficiency of its work. There are also some precautions before the oil seal is used. For example, it is necessary to check the mechanical seal before use. You can perform static pressure test to see if there is a leak. If there is any need to repair, replace, or perform other processing, after starting the system If there is a slight leak, it is necessary to observe whether there is a continuous leak and stop the machine. Pelletizing-cooling Integrated
LINA Pelletizing-Cooling Integrated Machine
LINA pelletizing-Cooling integrated pelletizing line centralizes all functions of a complete granulation line on one independent working platform. The pelletizing efficiency is 1-2 times higher than traditional masterbatch pelletizing production line. With the combination of PLC control system, LINA pelletizing-cooling integrated machine makes the granulation process easier, the working area smaller, labor cost lower and maintenance rate lower.
LINA CIM/MIM Twin Taper pelletizer
Twin taper forced feeding is adopted for mixed metal agglomerates, this feeding method is more efficient than traditional double wrist feeding method. Twin taper feeding is stable and feeding materials are uniform, it increases finished particles are uniform and full. This machine is specific for the granulation of high hardness, high strength and abrasion resistance materials, including stainless steel powder, iron powder, magnetic powder, zirconia, ceramic powder etc.
Main features
Oil shower lubrication system.
Material of barrel and screw: 38CrMoALA alloy steel nitride for 72 hours, polished and surface sprayed carbide.
Plunger type pelletizer (non-screw pelletizer): Feeding method of Plunger type pelletizer: hydraulic.
Applicable materials: High - end Inorganic nonmetal like zirconia ceramics.
Applicable to rare earth permanent magnet, magneto-optical, superconducting, hydrogen storage and other rare earth alloys.
Value Points:
1. Automation: Continuous kneading and pelletizing.
2. Eco-friendly: No gas masks needed while operating.
3. User-friendly: Quick release design for die head.
4. Modular: Based on user`s demand, manually material feeding can be updated to automatic weighted feeding.
Pelleting-Cooling Recycling Equipment,Pelleting-Cooling Integrated System,Pelleting-Cooling Integrated Recycling LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com
