A working aerial vehicle is a type of vehicle that can operate with multiple hydraulic cylinders that are operated by a hydraulic or electric system and can lift up to 3 meters. The hydraulically-powered manned aerial vehicles are contemporary advanced species mechanical equipment. The construction workers use the aerial vehicles to lift off the work. As long as they are used correctly, safety is guaranteed. However, it is not a proper operation or security measures have not been implemented. It is also a very dangerous master air operation procedure.

High-altitude truck features:

There are maneuvering devices in both the bucket and rotary seats to remotely control the start/stop of the engine, high speed/low speed, and use the electro-hydraulic proportional valve to control the movement of the arm. The stationarity is good, and the working arm can rotate left and right 360° continuously. Automatically maintain the working tank level by the linkage mechanism. When the main pump fails, it can operate the emergency pump down operation tank. It has night lighting and can lift heavy objects. Products are widely used in power, street lamps, municipal, gardens, communications, airports, construction (repair) ships, transportation, advertising, photography and other high-altitude operations.

1, SAMSEM new full hydraulic self-propelled chassis. Developed a self-propelled aerial work platform truck with completely independent intellectual property rights, using electromechanical-hydraulic integration, reliability design, and computer-aided design technologies, successfully developed a fully hydraulically driven, self-propelled special chassis that broke through. In the past, domestic high-altitude lifting platform trucks could only be limited by the design of the vehicle or crane chassis modifications.

2. The SAMSEM aerial working vehicle has a good track-to-slide running and stable operation. The chassis structure breaks through traditional design theories and methods, and reduces the center of gravity offset by optimizing the overall layout and load distribution of the platform. Using a unique large-angle back-up hinge structure, a variety of counterweight modules are properly set to effectively balance the working torque. Adopting the H-type variable cross-section composite box girder frame and high-load solid rubber tires, the overall stiffness of the chassis is increased, the stability of the whole machine running and working process is ensured, and the function of the high-altitude operation platform vehicle to carry the load is realized.

3, multi-purpose, multi-purpose operating device. Through the boom front end bracket, a lifting device or a passenger platform can be quickly installed to realize functions such as material lifting, hoisting and hoisting, and manned aerial work, and at the same time, an interface is provided for rapid switching of the extension work device and various work devices. .

4, a unique three-dimensional rotating lifting device. The designed three-dimensional rotating lifting device can not only automatically maintain the attitude of the lifted material, but also can achieve the adjustment requirements of lifting material at any height, any position and any direction in the space. The speed control is precise and sensitive, and the micro-motion performance is good. Satisfy the requirements for the installation of aerial work and ventilation ducts in large caverns.

5. More about maintenance and maintenance knowledge of aerial vehicles

Aerial Work Truck Categories:

Vertical lift type (also known as scissor type) aerial work vehicle, folding boom type aerial work vehicle, self-propelled aerial work platform, telescopic boom type aerial work vehicle, boom type aerial work vehicle, set of cylinder type aerial work vehicle, aluminum alloy Type aerial vehicles. Among them, the vertical lift type work bucket is of great importance, but its operation height is limited, its mobility is poor, and it is not flexible. At present, the domestic use of the folding arm type aerial work vehicle is widely used.

Cleaning Solution For Semiconductor

Cleaning runs throughout the semiconductor manufacturing. The cleaning of semiconductors runs through the entire semiconductor process. From the silicon wafer manufacturing, it is necessary to clean the polished silicon wafer to remove surface contaminants, remove photoresist, wet etching, CVD, etc. in the chip preparation, and then to the final material quality inspection. Every step needs to be cleaned to ensure that the next step is free from impurities and maintain the yield of the product. At the same time, as the chip process continues to shrink, the number of cleanings required is increasing. According to statistics, the number of cleaning processes accounts for one-third of the entire chip manufacturing process, and is an important part of chip manufacturing. Very low surface tension and viscosity, it can be well dispersed and spread into various gaps, with good scouring and wetting cleaning effect.

Chemical Cleaning Solutions,Hydrofluoroether Boiling Point Detergent,Hfe Poisonless Harmless Cleaning Solution,Cleaning Solution For Semiconductor

Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtechs.com