The Ministry of Industry and Information Technology issued the "Management Requirements for Hazardous Substances and Recyclable Utilization of Automobiles (Draft for Comment)" (hereinafter referred to as "Draft for Comment"), intending to strengthen the management of toxic substances by automobile manufacturers, accelerate the development of green materials and easy to disassemble, Parts used. This is also China's first way to strengthen the management of hazardous substances in the field of automobile manufacturing. According to the promotion schedule, the method will be officially implemented in 2016. In strict accordance with ISO 9001:20015 and ANSI Flanges; Ansi Flange,Wn Wnrf Flange,Long Weld Neck Flange,Lap Joint Flange Ansi B16.5 Shanxi Tianbao Group Co.,Ltd. , https://www.tbflange.com
It is understood that the "Draft for Comment" clearly states that automobile production enterprises, as the main responsibility of pollution control, should actively carry out ecological design, follow the design principles of easy dismantling and recyclability, adopt reasonable structure and functional design, and choose Non-toxic, harmless or low-toxic green materials and components that are easy to disassemble and utilize, use green manufacturing technology with high resource utilization efficiency, low environmental pollution and easy recycling; actively build green supply chain in the whole industry chain Implement hazardous substance and material labeling requirements.
At the same time, all levels of automotive parts and materials suppliers should truthfully provide information on the materials and hazardous materials used by the products to facilitate the tracking and analysis of harmful substances and recoverable utilization rates of automobile manufacturers.
From January 1, 2016, the management of hazardous materials and recoverable utilization of passenger vehicles (M1) with a total number of seats of no more than nine will be implemented, including the use of hazardous substances in new products and the calculation method for recoverable utilization. Comply with the requirements of national standards such as "Car Prohibited Substances Requirements", "Road Vehicle Recyclability and Recyclability Calculation Methods", etc., and included in the "Vehicle Production Enterprises and Products Announcement" management, executed 24 months after the production of vehicles .
It is reported that automobile manufacturers should provide the "Car Dismantling Guidebook" to the recycling and dismantling enterprises through appropriate channels and means within 6 months of the production announcement of new products, and to the Ministry of Industry and Information Technology (energy conservation and comprehensive utilization). Division) submits the "Car Hazardous Substances Information Sheet". If the above materials and information are not provided as required, they will be ordered to make corrections within a time limit, or the list will be announced.
Among them, the "Draft for Comment" also clearly pointed out that based on the supply chain data, the "Car Prohibited Substance Requirements" (GB/T30512-2014) stipulates the content of hazardous substances in the exempted parts, and the part name should accurately reflect the The specific location of the part in the vehicle. For exempt spare parts, such as batteries, directly report the hazardous substances content of the parts, and list the hazardous substances in the parts containing the materials for exempt materials such as aluminum.
In addition, the Ministry of Industry and Information Technology will publish an annual report on the green development of the automotive industry, publish information on the use of hazardous substances and recoverable utilization of automobiles, and summarize and evaluate the construction of automobile production enterprises and green supply chain management.
1.Make process card and quality plan
2.Choose the qualified raw material and do incoming test, not allowed
nonconforming material to enter into production process;
3.Producing and testing followed the quality documents
4.Be good at Quality records and product identification to ensure the product
traceability
5.Do the final inspection to ensure 100% of pass.