(1) Linear vibrating screen This equipment is a kind of biaxial inertial vibrating screen. Its movement track is straight, the screen surface is horizontally installed, the height is small, the amplitude is large, the screen surface is large, and the production capacity is high. It is suitable for medium and fine grain materials. Screening can also be used for dewatering, desliming and de-intermediation.
Anshan Mining Machinery Co., Ltd. cooperates with American RS Company to produce ZKX linear vibrating screen and YA round vibrating screen. There are 62 kinds of specifications in two series. ZKX (formerly TH) linear vibrating screen has 22 kinds of specifications, and its structure is shown in Figure 1.

Such shaker adapted ore, coal and non-metallic material is dehydrated, sculping, desliming and dry, wet classification, which slit screen bar is 0.5 to 12 mm, a mesh size of coining Ñ„13 ~ 80 mm, braided mesh The hole is 3 to 80 mm. The screen has high strength, fatigue resistance, long service life, stable operation, low noise and convenient maintenance.
(2) Resonant sieve This kind of sieve is a screening equipment that works in the near resonance state, which has the advantages of large output; high screening efficiency; small required excitation force; low power consumption, about other vibrating screens. 1/5～1/10; the transmission mechanism is simple and the force is small, the screen surface can be correspondingly larger; the amplitude stability is good; the work is stable, the dynamic load is small; it can be used for screening various materials, and can also be used for dehydration, Desliming, de-intermediation and screening of medium and fine-grained materials.
The production capacity of the dewatering screen is generally calculated based on the productivity of the unit sieve surface. When the material density increases, the production capacity per unit area of ​​the sieve increases accordingly.
The total area of ​​dewatering screen required is:

Where S'—the screen area of ​​each dewatering screen, m ² .[next]
(3) Fixed slit screen
The screen surface of the fixed slit screen is made of wedge-shaped stainless steel wire with a slit width of 0.5-0.75 mm. It is commonly used for the preliminary dewatering of clean coal. It is generally installed at the bottom of a section of the transport chute, instead of the bottom plate of the chute, its width and The chute is the same, the length is about 3 to 5 meters, or longer to improve the dewatering efficiency. The inclination angle of the sieve surface is the same as that of the chute, generally about 5-8°. In order to facilitate the transportation of the dehydrated material, it is usually installed at the end of the chute, or the inclination angle of the chute after the sieve surface is increased to 35-40°.
The size of the dewatering screen should be determined according to the following principles:

Where S———the required sieve area, m ² ;
W——— the amount of water that should be excreted, m ³ /h;
q———The amount of water that can be drained per unit sieve surface, m ³ /(m ² · h); when the slit width is 0.75～1mm, q=300 can be selected; when the seam is 0.5mm, q=200.
Sieve length

Where b———the width of the screen surface, the width of the chute, m.
(4) The curved screen is generally used for screening and dewatering fine coal of less than 10 mm, and can also be used for de-intermediation of heavy medium mineral processing products. The device is simple in structure and light in weight; small in size and small in floor space; no moving parts and transmission mechanism itself; large production capacity; but high water content in the sieve product, fast wear when using pressurized feeding; It must be a certain pressure.
Practice has shown that the size of the curved sieve mesh is about 1.5 to 2 times that of the sieved product. The type of curved screen can be divided into five types according to the screen curvature: 45°, 60°, 90°, 180° and 270°. Among them, the materials used in the concentrating plant and the coal preparation plant are classified, delimed and dewatered. It is a 45°, 60° and 90° screen surface; it can be divided into two types according to the feeding method: pressureless (self-flow) and pressure type feeding. The pressure feed is used on a large arc-shaped screen surface of 180° or 270°. The slurry is sprayed through a flat nozzle onto the screen surface. The pressure is about 10 to 20 kPa (1 to 2 kg/cm ² ) to increase the slurry speed (generally above 10 m/sec), resulting in high screening efficiency. The curved screen structure is shown in Figure 2.

For a curved arc with a radius of 0.5 to 0.6 m, the production capacity can be approximated as follows:
Q=C · A ₀ · Ï… (5)
Where Q—the flow rate of the slurry, m3/h;
A ₀ ———effective area, m ² ; take 0.3 to 0.4 times of the actual sieve surface;
Υ—the speed of the slurry at the feed end, m/s;
C———coefficient, generally 160-200.
The relationship between the graded size of the curved sieve and the size of the mesh is shown in Fig. 3.

Galvanized Hexagonal Wire Mesh

hexagonal chicken wire mesh netting is widely used in industrial and agricultural constructions as well as in building works and all those made for the purpose of reinforcing and fencing as protective cage, boiler cover in resisting to heat or cold, floor concrete reinforcement. It is also used as fence for poultry cage, fishing pool, children playground and family decorations.