The heat loss and metal loss of molds are extremely high in high temperature environments. The value of mold consumption per year in the machining industry is five times the total value of various machine tools. Taking the metallurgical industry as an example, only the consumption of hot rolling rolls is more than 300,000 tons per year. The value of hot rolling rolls accounts for more than 5% of the steel production cost. The large consumption of molds not only directly increases the production costs, but also results in frequent economic shutdowns of large production lines due to frequent mold changes resulting in greater economic losses.

The only domestic manufacturer of high-temperature heat-insulating coatings for molds, ZS-1 high-temperature heat-insulation and heat-insulation coatings produced by Beijing Zhisheng Weihua Chemical Co., Ltd., has successfully solved the problem of large amounts of resource loss in the mold industry. The paint has a thermal conductivity of 0.03 W/m. K, temperature 1800 °C, can effectively inhibit a variety of conductive heat and radiant heat, thermal insulation inhibition efficiency of up to 90%. The coating is coated with a thickness of 8mm at the mold surface of 1100°C. The temperature of the mold surface can be reduced from 1100°C to less than 100°C. In addition, Zhisheng Weihua mold high-temperature insulation coating chlorine ion content is zero, can also prevent the air or the process of wet chlorides, sulfides into contact with the metal surface, play a very good anti-corrosion effect on the metal, it will not lead to metal The welding seam is brittle, and the insulation coefficient of the high-temperature insulation coating of ZS-1 Zhisheng mould is very high, and it has very good insulation effect under high temperature.

After the mold is brushed with high-temperature heat-insulation paint, the energy loss of thermal energy can reach more than 80%, the corrosion rate of mold metal can be reduced by 60%, the safety of personnel can be improved by 100%, and the profit of the enterprise can be increased by more than 30%.