Liberation has a hydraulic retarder, and it is not afraid of the brakes!


Due to the large cargo capacity of trucks, the disadvantages of the traditional brake drum brake system's weakness in the long-distance downhill slope have become increasingly prominent.



Hydraulic retarder core advantages

High security

80-90% of the braking tasks can be borne by the retarder. The service brake is always in a cold state. Only when the driver encounters an emergency, he only uses the service brake, no brake, tires and other overheating;

Hydraulic retarder through the vehicle cooling, its continuous braking power can reach twice the engine power, the maximum braking power of 600 horsepower, no thermal decay, to ensure vehicle safety;

Hydraulic retarder with downhill cruising function, the driver can set the downhill speed, so that the driver is easy and fun to operate, in the complex road conditions, the driver does not have to be nervous.

High income

Extend tire and brake life, reduce maintenance frequency, and reduce downtime.

high efficiency

The average speed is higher, shifts are fewer, wear is reduced, and operational efficiency is higher.

No worry about overheating hydraulic retarder

The working temperature of the hydraulic retarder generally does not exceed 125°C, which can avoid the occurrence of brake overheating, which reduces the failure rate of the clutch, transmission, and wheel end system of the vehicle, saves the user's repair cost, and improves the vehicle output rate. It also guarantees user income.



Brake overheating can be avoided, eliminating the risk of cracking of the brake hub due to high temperature flooding brakes or high temperature bursts.

Hydraulic retarder energy saving, environmental protection, comfort

The Voith Hydraulic Retarder selected by the liberation truck consumes almost no extra fuel and electricity, reduces vehicle brake dust emission by 80%, protects the environment, and greatly reduces the noise pollution generated by the brake lining during braking. Smooth, comfortable ride.

At present, the J6P 6×4 tractors with “reliability upgrade, power upgrade, comfort upgrade, light weight upgrade, safety upgrade, and adaptability upgrade” are all available with Voith Hydraulic Retarder. The method of adding water tanks to the brake drums is suitable for the implementation of the new GB1589 environment, which can effectively reduce the body weight.


After liberating the J6P 6×4 tractor to match Voith Retarder, the average speed is higher, shifts are fewer, wear is reduced, and operational efficiency is higher. In the process of long downhill slopes, the use of brake devices can be greatly reduced, thus avoiding the major safety issues of brake failure caused by long-term braking due to thermal deceleration, which greatly improves driving safety, and at the same time can ease driver’s nervous emotions and driving. Fatigue strength makes card safer driving safety more secure!



Copyright Notice: This article is derived from other media. If you need to reproduce, please respect the copyright and retain the source. Please feel free to contact us if you have any questions about the quality of the content. The Commercial Vehicle House will handle it as soon as possible and respond to it.




1.6MM Color Coated Sheet

1.6MM Color Coated 5052 H32 China Aluminum Sheet Suppliers

1200x3600mm

1500x3000mm

Aluminum Sheets offer many advantages over other choices of metal. When designing the facade of your building you have to take these factors into consideration.

Aluminium is Lightweight
It is a very light metal with a weight that is a third of the weight of steel. Aluminium weights around 2,7g/cm3. When constructing the facade of your building aluminium will ease the process of installation due to the low weight.

Resistance to Corrosion
Aluminium is naturally protected from corrosion because it has a protective oxide coating. This is especially useful for the facade of buildings where you want to build to last for a longer period of time. Aluminium will last for several decades.

Ductility
Because aluminium is ductile and has a low melting point. This ductility allows us to easily form aluminium panels to the needs of any architect.

Aluminium is Recyclable
Aluminium and our aluminium panels are completely recyclable with no loss of quality. It requires very little energy to recycle aluminium. Only around 5 percent of the energy that it takes to produce aluminium is needed to recycle it.


Aluminum Sheet Roll,5052 Aluminum Sheet,Aluminum Sheet Near Me,Aluminum Sheet Metal,Aluminum Sheet For Sale

Aluminum Sheet, Acrylic Plexiglass Sheet, Polypropylene sheet, PVC Foam Board Sheet, Aluminum Composite Panel , https://www.decoratepanel.com