·Chrysler (China) Automobile Sales Co., Ltd. and GAC Fiat Chrysler Automobile Co., Ltd. recalled some imported cars

Recently, Chrysler (China) Automobile Sales Co., Ltd. and GAC Fiat Chrysler Automobile Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine. From November 6, 2017, the following imported cars will be recalled, totaling 66,698:

(1) Chrysler (China) Automobile Sales Co., Ltd. recalled some imported 2011-2015 Coolway series cars produced from June 26, 2010 to April 20, 2015, totaling 60,947 vehicles;

(II) GAC Fiat Chrysler Automobile Co., Ltd. recalled some of the imported 2012-2014 Filipino series cars produced during the period from June 26, 2010 to April 20, 2015, with a total of 5,551 vehicles.

Due to design reasons, some vehicles in the scope of this recall may cause the steering wheel harness to wear due to the positioning guide on the inner side of the steering wheel cover. In some cases, the steering wheel harness may be short-circuited, resulting in accidental deployment of the driver's side airbag, posing a safety hazard.

Chrysler (China) Automobile Sales Co., Ltd. and GAC Fiat Chrysler Automobile Co., Ltd. will inspect the steering wheel harness for vehicles within the recall range. If the steering wheel harness is worn out, remove the steering guide on the inside of the steering wheel cover and replace the steering wheel harness with the protective cover installed. If it is not worn, install the protective cover on the steering wheel harness and remove the locking bolt on the steering wheel cover. To eliminate defects.

Chrysler (China) Automobile Sales Co., Ltd. and GAC Fiat Chrysler Automobile Co., Ltd. will notify customers by registered mail. Users can obtain information about the recall by calling Chrysler (China) Automobile Sales Co., Ltd. Service Hotline 400-6500-118 and GAC Fiat Chrysler Automobile Co., Ltd. Service Hotline 400-878-9999. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.
 

Marine PE100 Plastic Pipe

Mitered Fittings,Marine Pe100 Plastic Pipe,Marine Pe100 Plastic Pipe For Accommodation,Marine Pe100 Plastic Pipe For Water Supply

Jingjiang Haihong Plastic & Rubeer Science -Technology Co.,Ltd , https://www.marineplasticpipe.com