Special-purpose vehicle techniques: Sew-sucking vehicles turn to be skillful. Some sewage-sucking vehicles are different from other ordinary vehicles when turning. First of all, the tank of the sewage suction truck is loaded with liquid or semi-liquid substances, and in order to facilitate unloading, the suction tank of the sewage suction truck generally has no anti-wave plate. However, when the sewer truck is steering, the sewer water will be concentrated on one side due to inertia and centrifugal force, causing the gravity center of the sewer truck to change. If the suction truck drastically turns at high speeds, it is prone to rollover. How to avoid the sewage suction car rollover? Auto Double Iridium Spark Plug Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive. Denso Spark Plug,Auto Iridium Spark Plug,Spark Plugs For A Car,Iridium Spark Plug For Car LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.jmsparkplugs.com
Special Vehicle Tips: Sludge Picking Tips
Don't try to combine the line when the suction truck is in a bend or turn. Because the body of the sewer car itself is in an unstable state, this instability will be exacerbated if the line is attempted. If the sewer truck is driving on a mountain road, it is especially necessary to avoid this situation.
If the curve is wide enough, you can follow the principle of “cutting outside and insideâ€, or you can call it outside and inside. The radius of the arc that passes through in this way is greater than the radius of the actual curve, that is to say a more sleek turn. The specific method of operation is:
1. Sewage suction truck If the vacuum suction truck is turning right, you can try to stick to the middle of the road before entering the bend, and stick to the roadside as much as possible in the bend. Of course, there is no non-motorized vehicle or pedestrian on the roadside. When you come out of the corner, you slowly drive to the right.
2. Sewage suction truck If the vacuum suction truck is turning left, you can stick to the roadside before entering the bend. When you enter the bend, you can stick to the middle. The premise is that there is no non-motorized vehicle or pedestrian on the roadside. At the corner, they leaned to the right again.
In short, when the sewage suction truck turns, when the situation permits, it is necessary to enlarge the turning radius angle as much as possible. The larger the radius is, the better, and the slower the speed is, the better the steering wheel is. In this way, it is possible to effectively reduce the sewage contained in the sewage suction truck because the inertia and centrifugal force are concentrated to one side, so as to ensure the stability of the vehicle body of the sewage suction truck and avoid the risk of side rollover.