High quality manual chain block
Chain block is a portable lifting device easily operated by hand. Types
of chain block is suitable for using in factories, agricultural production, and in wharf,
docks and storage for fixing machines, lifting cargo, and loading and unloading goods.
Chain block
hoist can be attached to a trolley of any type as a travelling chain block. It is suitable to monorail overhead conveying system, hand
travelling crane and jib crane.
Specifications:
Model
VT-1/2
VT-1
VT-2
VT-3
VT-5
VT-10
Capacity(t)
0.5
1
2
3
5
10
Lifting Height(m)
2.5
2.5
3
3
3
3
Test load(t)
0.75
1.5
3
4.5
7.5
15
H min
Headroom(mm)
285
315
380
475
600
700
Chain pull to lift full load(N)
25
33
34
35
39
41
No. of Load Chain
1
1
1
2
2
4
Diameter of load chain
6.1
7.1
8
7.1
9
9
N.W(kg)
8.4
11
21
22
40
77
Products show
Our Services
1.Client
We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and
every customer is our main goal and motivation in conducting our business.
2. People
We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.
3. Product
Our products are of high quality standards and always come with certificate of compliance by the manufacturers.
4. Performance
We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.
5. Free sample and OEM service
We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.
5Ton Manual Chain Block,Lift Chain Hoist,20Ton Chain Block,Manual Chain Block Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggings.com
Before loading the garbage, when the no-load operation reaches 6 standard air pressure, hang the power take-off device (bottom left of the steering wheel in the cab) and check whether there is any leakage or abnormality in each component, and then operate according to the position indicated by the operation signboard; The steps are as follows:
1. Docking garbage loading: push the rear door operating handle to the open position, and the wall cylinders on the left and right sides of the box are extended so that the rear door of the box is first pushed out horizontally for a certain distance, and is turned up and opened, releasing the operating handle to make it back To the median. After the rear door is opened, the garbage truck is docked with the compression box door, and the garbage is pushed horizontally into the carriage from the compression box. After the garbage is loaded, the garbage truck is released from the docking state and the rear door operation handle is pushed to the closed position. The cylinders on both sides of the wall are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return it to the neutral position.
Second, butt-type refuse dump: When the vehicle reaches 6 standard air pressures, the power take-off device is hung. After checking whether there are any leaks or abnormalities in each component, operate according to the position indicated by the operation signboard. Push the rear door operating handle to the open position, and the wallboard cylinders on the left and right sides of the box are extended, so that the rear door of the box is first pushed out horizontally for a certain distance and then turned up and opened; releasing the operating handle to the neutral position. Push the handle of the dumping operation to the raised position, the self-unloading cylinder extends, the garbage box body rotates around the turning shaft, the garbage box forms a dumping angle, the garbage is discharged from the box body, and the dumping operation handle is released to return it Median;
3. After the docking garbage is unloaded, the dump handle is pushed to the falling position, the dump cylinder is retracted, the garbage box is rotated around the turning shaft, the garbage box is put back on the attached frame, and the dump handle is released. It comes back to the middle. Push the rear door operating handle to the closed position, the wall cylinders on the left and right sides of the box are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return to the neutral position. Loosen the power take-off bin and place it. The vehicle can be driven. 
Dongfeng pointed butt-type garbage truck
Xigong Worker's Compression Station Docking Garbage Truck Operation Method
Xigong Chusheng Docking Garbage Truck is a special vehicle used for garbage transfer and unloading in urban garbage compression stations. The box body of the vehicle adopts the high-quality carbon steel plate sealed and welded structure, which has the advantages of high strength, light weight, and no secondary pollution. The following is the method of operation of garbage collectors of Xiagong Chusheng.