The sewage collection capacity of the compression garbage truck is reflected in the design of the recovery tank. There are usually two methods. One is to place the recovery tank in the lower front of the filler, which can better use the filler and the lower part of the box. The space between the vehicles can also reduce the rear suspension of the vehicle and increase the departure angle. However, the capacity of the recovery tank is small and the potential for expansion is small. The other option is to locate the recovery tank under the filler floor and to abandon the use of fillers. The space between the lower part of the car body increases the rear suspension of the car, reduces the departure angle, and the capacity of the sewage tank is large. The potential for expansion is also great. In the second solution, the expansion tank expansion method is to fill the tank. Part of the space is used to collect sewage. Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive. Platinum Spark Plugs,Laser Iridium Spark Plug,Ngk Platinum Spark Plugs,Ngk Iridium Ix Spark Plug LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.jmautoplugs.com
For a compact garbage truck with a capacity of about 5 tons, the filling space of the conventional recovery tank and the filler is independent. Regardless of the utilization of the filling space, the capacity of the recovery tank is only 120L, which does not fully meet the sewage collection requirements. However, 4 to 5 round holes of about 20mm are opened laterally at the bottom of the filler floor, connecting the two spaces. The volume of the sewage tank has more than doubled and the capacity for collecting sewage has greatly increased. In contrast, the volume of the first type of recovery tank is limited to between 60 and 80 L, and it is often side-loaded waste water.