Packing Machine,Compress Packing Machine,Automatic Packaging Machine,300 P/H Automatic Packaging Machine Sichuan Doujin Technology Co., Ltd. , http://www.doujinmachine.com
1.Feature:
This series CO2 laser tube is matured product. It has high cost performance and stable performance. It has been adopted by many factories for medical equipment and CO2 laser stamping machines. Also these tubes are exported to other countries with laser machines. The excellent laser spot and stable laser power make the laser tube distinguished and high praised.
This series CO2 laser tube's power stability is not more than ±5%.It is widely used at medical equipment and laser carving or engraving machine.
Â
2.Specification
Model
Length
(mm)Diameter
(mm)
 Rated Power
( W)Peak Power
( W)Work Current
(mA)Working life
(Â Hours)Warranty
(Month)
BL-450
450
50
18
25
12
2500-3000
3
BL-600
600
50
25
35
15
2500-3000
3
BL-700
700
50
35
40
15
2500-3000
3
BL-800
800
50
40
45
18
2500-3000
3
BL-850
850
50
40
45
18
2500-3000
3
BL-950
950
50
40
50
20
2500-3000
3
BL-1000
1000
50
40
50
20
2500-3000
3
Note
CO2 laser tube warranty:3 months.
Delivery time:2 working days after payment received.
Package:Carton,foam and wooden box.
Shipping method:DHL,UPS,Fedex or TNT
Payment method: T/T,PAYPAL,Western Union
Application:General type laser tube and widely used on 40-50watt CO2 laser engraving or stapm machine
Common problem on CO2 laser tube
Â
1 .CO2 tube's power is low and power's falling speed is fast.
A. Â Check if working current exceeds permitted current's 10%. If it is long time at this situation, tube's power will fall very fast. Please check if the CO2 power supply is matched with this tube and input voltage is normal.
 B.  Check if water cooling system is normal. It contains cooling water's  temperature, water flow volume and water's quality. During working, water's temperature should not be large than 30ºC and water flow volume is not more than 4L/min(This data can be increased according to different model CO2 tube). Cooling water should be changed frequently and must be clean.
 C.  Check CO2 tube's output lens ,reflective mirror and focus lens is dirty. Also check if laser optics is correct. Because mirror or lens is easy dirty during optics adjustment. If so, please use 99.7% absolute alcohol clear them.
D. Â Check if discharge diode's color is normal. If it is blue or purple or shows white color, it is not good condition.
Â
2. Bad laser spot or laser spot changes
Check if cooling water is normal.
Check if working current is too large.
Check if installation direction is correct.
Check if bracket is correct. Generally it is at CO2 tube's 1/4 position.
Check if lens or mirror is dirty or be sheltered.
Check if discharge color is normal. If CO2 gas leaked, laser spot also is effected.
Â
3 .CO2 laser tube doesn't output laser
Check if CO2 power supply's control wires are connected correctly then check if connection wring between CO2 tube and CO2 power supply are correctly.
Pull out all signal terminal and connect power supply and laser tube correctly, then press TEST button(Red) at front side of power supply.
Â
Check if discharge diode's color is normal and check if it has ignition sparks. If tube is not damaged and ignition discharge is blue or purple, it indicates CO2 gas leak. If no ignition discharge and it has high voltage discharge sound when press TEST (Red) button at power supply, it also indicates CO2 gas leak.
If ignition discharge is white and no laser output, it indicates working gas is resolved.
If it has bright white spot when press TEST (Red)button at power supply or it has wave discharge when ignition, it indicates high voltage breakdown. Please check if cooling water system or working current is normal. Or check if power supply is matched with CO2 laser tube.
Check if it has water in side of CO2 tube and inner tube is damaged.
Â
4 .CO2 laser tube burst or damaged
If it has circular arc and smooth burst at near 10cm of glass connection, it is caused by stress.
 If it has serrated and wave burst at near negative electrode slice and serious damage with many fragments, it is caused by cooling water.
If electrode's terminal or cooling water box is damaged slightly and inner lens is good, it can be repaired. The electrode terminals and cooling water box are treated by high temperature. If it is not outside force,generally they are not easy be damaged
Â
5 .Not good engraving
Check if CO2 laser tube and power supply is matched with each other. If it has tailing or non smooth shading, it is caused by this reason.
Connect or disconnect connection metal wire between negative electrode terminal and metal cooling water box.
Check if it has correct laser early output parameter setting.
Â
6 .Not good cutting
Check if cooling water system is normal.
Check if focus length is correct
Adjust air blowing amount.
Change software's image(round or squre) and then make cutting. This way is used to figure if it is image's problem.
Â
40W-50W CO2 Laser Tube
1.Feature:
This series CO2 laser tube is matured product. It has high cost performance and stable performance. It has been adopted by many factories for medical equipment and CO2 laser stamping machines. Also these tubes are exported to other countries with laser machines. The excellent laser spot and stable laser power make the laser tube distinguished and high praised.
This series CO2 laser tube's power stability is not more than ±5%.It is widely used at medical equipment and laser carving or engraving machine.
Â
2.Specification
Model
Length
(mm)Diameter
(mm)
 Rated Power
( W)Peak Power
( W)Work Current
(mA)Working life
(Â Hours)Warranty
(Month)
BL-450
450
50
18
25
12
2500-3000
3
BL-600
600
50
25
35
15
2500-3000
3
BL-700
700
50
35
40
15
2500-3000
3
BL-800
800
50
40
45
18
2500-3000
3
BL-850
850
50
40
45
18
2500-3000
3
BL-950
950
50
40
50
20
2500-3000
3
BL-1000
1000
50
40
50
20
2500-3000
3
Note
CO2 laser tube warranty:3 months.
Delivery time:2 working days after payment received.
Package:Carton,foam and wooden box.
Shipping method:DHL,UPS,Fedex or TNT
Payment method: T/T,PAYPAL,Western Union
Application:General type laser tube and widely used on 40-50watt CO2 laser engraving or stapm machine
Common problem on CO2 laser tube
Â
1 .CO2 tube's power is low and power's falling speed is fast.
A. Â Check if working current exceeds permitted current's 10%. If it is long time at this situation, tube's power will fall very fast. Please check if the CO2 power supply is matched with this tube and input voltage is normal.
 B.  Check if water cooling system is normal. It contains cooling water's  temperature, water flow volume and water's quality. During working, water's temperature should not be large than 30ºC and water flow volume is not more than 4L/min(This data can be increased according to different model CO2 tube). Cooling water should be changed frequently and must be clean.
 C.  Check CO2 tube's output lens ,reflective mirror and focus lens is dirty. Also check if laser optics is correct. Because mirror or lens is easy dirty during optics adjustment. If so, please use 99.7% absolute alcohol clear them.
D. Â Check if discharge diode's color is normal. If it is blue or purple or shows white color, it is not good condition.
Â
2. Bad laser spot or laser spot changes
Check if cooling water is normal.
Check if working current is too large.
Check if installation direction is correct.
Check if bracket is correct. Generally it is at CO2 tube's 1/4 position.
Check if lens or mirror is dirty or be sheltered.
Check if discharge color is normal. If CO2 gas leaked, laser spot also is effected.
Â
3 .CO2 laser tube doesn't output laser
Check if CO2 power supply's control wires are connected correctly then check if connection wring between CO2 tube and CO2 power supply are correctly.
Pull out all signal terminal and connect power supply and laser tube correctly, then press TEST button(Red) at front side of power supply.
Â
Check if discharge diode's color is normal and check if it has ignition sparks. If tube is not damaged and ignition discharge is blue or purple, it indicates CO2 gas leak. If no ignition discharge and it has high voltage discharge sound when press TEST (Red) button at power supply, it also indicates CO2 gas leak.
If ignition discharge is white and no laser output, it indicates working gas is resolved.
If it has bright white spot when press TEST (Red)button at power supply or it has wave discharge when ignition, it indicates high voltage breakdown. Please check if cooling water system or working current is normal. Or check if power supply is matched with CO2 laser tube.
Check if it has water in side of CO2 tube and inner tube is damaged.
Â
4 .CO2 laser tube burst or damaged
If it has circular arc and smooth burst at near 10cm of glass connection, it is caused by stress.
 If it has serrated and wave burst at near negative electrode slice and serious damage with many fragments, it is caused by cooling water.
If electrode's terminal or cooling water box is damaged slightly and inner lens is good, it can be repaired. The electrode terminals and cooling water box are treated by high temperature. If it is not outside force,generally they are not easy be damaged
Â
5 .Not good engraving
Check if CO2 laser tube and power supply is matched with each other. If it has tailing or non smooth shading, it is caused by this reason.
Connect or disconnect connection metal wire between negative electrode terminal and metal cooling water box.
Check if it has correct laser early output parameter setting.
Â
6 .Not good cutting
Check if cooling water system is normal.
Check if focus length is correct
Adjust air blowing amount.
Change software's image(round or squre) and then make cutting. This way is used to figure if it is image's problem.
Â
Water Cooling Type Stable Laser Length800mm Dia50mm Min 40W Max 45W CO2 Laser Glass Tube
Model NO.: BL-800 40-45W CO2 laser tube
Laser Classification: Gaseous Laser
Engraving Method: Lattice Engraving
Length: 800mm
Diameter: 50mm
Cooling Method: Water
Warranty: 3months
Service Life: 3000hours
Min Laser Power: 40W
Max Laser Power: 45W
Usage: 40W CO2 Laser Engraving Machine
Material: Glass
Delivery Time: 5-7 Working Days for 50PCS
Trademark: Rubylasertech
Transport Package: Wooden Box and Foam
Specification: 800mm length 50mm diameter 40-45W CO2 laser tube
Origin: Jinan China
HS Code: 9013220009
Model NO.: BL-800 40-45W CO2 laser tube
Laser Classification: Gaseous Laser
Engraving Method: Lattice Engraving
Length: 800mm
Diameter: 50mm
Cooling Method: Water
Warranty: 3months
Service Life: 3000hours
Min Laser Power: 40W
Max Laser Power: 45W
Usage: 40W CO2 Laser Engraving Machine
Material: Glass
Delivery Time: 5-7 Working Days for 50PCS
Trademark: Rubylasertech
Transport Package: Wooden Box and Foam
Specification: 800mm length 50mm diameter 40-45W CO2 laser tube
Origin: Jinan China
HS Code: 9013220009
40W-50W CO2 Laser Tube