wood biomass pellet mill / pellet machine equipment on sale
Â
Â
Professional Real Manufacturer for wood pellet mill!Â
 Â
 We are specialized in designing and manufacturing biomass pellet machinery and the complete production line(all auxiliary equipment) with advanced technology abroad.
Â
The current products include: hammer mill, ingredient weighing system, mixer, pellet mill, counter-flow cooler, dryer, crumbler, rotary screener, liquid adding equipment, pulse filter equipment, horizontal and vertical conveying equipment, links and gates, permanent magnet cylinder, and de-iron equipment etc.
Â
Features:
1. Over 10 years experience and more than 1000 turn key pellet lines
2. Widely used for large scope of raw material, such as wood chips,sawdust,straw,grass,rice husk,pasture,palm leaf etc
3. The feeder's especial structure makes materials conveyed evenly, it is specially designed for pellet of light substance with the density of 0.3-0.6g/ cm3;
4. The feeder is variable speed controlled to meet different output requirements and with the special structure, it makes materials conveyed evenly
5. With magnet and over load protection system, which can protect the machine well during production
6. The imported bearing and oil seal in the main drive to ensure highly-efficiency,stability and durability
7. With international advanced equipment and technology, Stainless ring die has long service life and can make slippy pellet with high quality
8. Gearbox: with pinion shaft, main gear, main shaft, quill shaft, gearbox body, manual lubrication system and overload protection system
 It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which will increase the output by 15% when compared to a machine with a belt conveyer;
9. Coupling assembly: with hub-taper lock bores, bushing-taper locks, S-shaped grid cover etc.
10. One set of roller assembly---two roller system
Â
Model
Capacity
Power(Kw)
Inner diameter of dieÂ
Pellet Size
Dimension
Net Weight
(t/h)
Main
Feeder
(mm)
(mm)
(T)
WZLH350
0.5-0.8
55
0.75+0.75
Φ350
Φ6,Φ8,Φ10
2600*1100*1800
3
WZLH420
1-Â 2
90/110
1.5+1.1
Φ420
Φ6,Φ8,Φ10
2800*1100*2000
4
WZLH508
1.5-2.5
132/160
1.5+1.1
Φ508
Φ6,Φ8,Φ10
3000*1260*2100
5
WZLH768
2.5-3.5
185/200
2.2+1.5
Φ768
Φ6,Φ8,Φ10
3200*1400*2300
6
 1 SCREW FEEDER
Feeder consists  of frequency conversion (electromagnetic)  speed-adjusting motor, reducer,  feeder shell and feeder shaft.
1.1 Â Â REDUCER
Feeder  reducer   adopts  cycloidal   pin  gear  reducer  whose  reducing   ratio  is  1:17.  It is directly connected  with speed-adjusting motor to  reduce the speed and  make feeder capable  of being adjusted for speed with effective rotational speed 12-120rpm.
1.2 Â Â FEEDER
See Figure 2 for the structure of feeder.   It consists of feeder  shell, feeder shaft and bearing with housing, etc.
The feeder paddle is of full-face type with variable pitch.
The feeder serves to  convey the material. Its rotational  speed is adjustable, that is  to say, feeding volume is variable  in order to reach the  rated current and output.  Feeder shaft can  be removed from the right side of feeder shell for cleaning and maintenance.
PELLET CHAMBER
The structure of pellet chamber is shown in Figure 3. It  mainly consists of die (1),
two rollers (3), deflector (8), knives (11) and roller adjusting screws (7). Mash  powder material  flows to two  pelleting areas through feed cone and deflector. Quill  flange drives die to rotate,  mash powder material is drawn in between die and  rollers, and two opposite rotating parts press mash powder material gradually into die holes. Material shapes in die holes and is pressed out of die holes continuously, then the pelleted  material is cut to  required length by  knives and finally the  shaped pellet material  flows out of the machine.
WHO is ATS machine:Â
ATS machine is china top 5 famous brand feed machinery manufacturer and engaged in feed machine industry for 20years.We are not only doing quite well for china domestic market but also fantastic for overseas market. ATS machine certified by SGS , CE, ISO, GOST, along with a lot of patents. please take a look at of our factory scene:Â
Â
ATS certificationÂ
Â
Famous International Brands cooperate with ATS machine
Â
Clients cooperation with ATS machineÂ
Â
ATS HONORS AND SHIPMENTS with ATS machineÂ
Â
FAQ
1. Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, which has 20 years of experience in this industry.
   Â
2. Q: How can IÂ get to your company?
A: You can get a flight to Shanghai Airport. We will go to pick you up. (About 3-4 hours by car)
     You can get a flight to Nanjin Airport. We will go to pick you up. (About 1 hour by car)
3. Q: How long is your warranty time?Â
A: One year(Calculated from the equipment arrives the customer's side.). After this period we will support you when needed. You will be welcome to contact us with any problem may happened.
Â
4. Q: Will you send engineers to install the plant?
A: Yes, but at an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.
Â
5. Q: Do you have some foreign customers using your equipment?
A: Yes, we have.our company has established business relationships with customers from all over the world...
If you are interested in ATS machine, pls feel free to contact with us:Â
Contact person: Mr DavidÂ
Â
0086-13921060980