MEB-500 Plastic Bottle HDPE Recycling Machine   MEB-500 Plastic Bottle HDPE Recycling Machine  Â
Introduction
Application: used to recycling baled or loose hdpe/pe/pp bottles
Crusher screen mesh size: 18mm or customized
Capacity: >500 KG Per Hour
Main Machines & Function
Label Remover
used to peeling the labels from plastic bottles by high speed blades;
working without water;
label separation rate >95% (for round bottle).
Crusher
used for size reduction of plastic bottles into flakes;
v-shape rotor design for high efficiency;
capacity: 500-600kg/hr (screen mesh size: 18mm).
Friction Washer
used to scrubbing the flakes by high speed blades to remove dirt and water;
high speed (800rpm) for high efficiency.
Hot Washing Tank
used to washing the flakes by hot water to remove glue and greasy dirt;
feeding caustic soda/detergent to wash;
heating by electricity or customized;
tank outside with heating protecting layer made of rockwool;
special design for PP/PE recycling.
Sink-Float Tank
used to separating the sinkable contamination and cleaning the PP/PE flakes by rolling drums;
sink-float tank designed with 5pcs automatic drums on top for flakes cleaning and conveying;
the side dirt lift screw conveyor is optional.
Drying Machine
including vertical dewatering machine and hot air drying system;
used to reducing moisture content remain from the flakes by high speed blades and hot air;
dewatering machine spinning speed: 1200rpm;
heating by electricity;
final moisture content remain <1%.
Electric Control Cabinet
with thermal relay to projecting the engin;
with overloaded alarm and protecting system;
with emergency shut off control.
Optional Machine
Trommel Separator
used to loosening the bottles and screening out the dirt, sand, soil from bottles;
installed before label separation unit.
Zigzag Label & Dust Separator
used to sucking out the label flake remain and fine dust from finished product;
installed before collecting silo.
  Â
Introduction
Application: used to recycling baled or loose hdpe/pe/pp bottles
Crusher screen mesh size: 18mm or customized
Capacity: >500 KG Per Hour
Main Machines & Function
Label Remover
used to peeling the labels from plastic bottles by high speed blades;
working without water;
label separation rate >95% (for round bottle).
Crusher
used for size reduction of plastic bottles into flakes;
v-shape rotor design for high efficiency;
capacity: 500-600kg/hr (screen mesh size: 18mm).
Friction Washer
used to scrubbing the flakes by high speed blades to remove dirt and water;
high speed (800rpm) for high efficiency.
Hot Washing Tank
used to washing the flakes by hot water to remove glue and greasy dirt;
feeding caustic soda/detergent to wash;
heating by electricity or customized;
tank outside with heating protecting layer made of rockwool;
special design for PP/PE recycling.
Sink-Float Tank
used to separating the sinkable contamination and cleaning the PP/PE flakes by rolling drums;
sink-float tank designed with 5pcs automatic drums on top for flakes cleaning and conveying;
the side dirt lift screw conveyor is optional.
Drying Machine
including vertical dewatering machine and hot air drying system;
used to reducing moisture content remain from the flakes by high speed blades and hot air;
dewatering machine spinning speed: 1200rpm;
heating by electricity;
final moisture content remain <1%.
Electric Control Cabinet
with thermal relay to projecting the engin;
with overloaded alarm and protecting system;
with emergency shut off control.
Optional Machine
Trommel Separator
used to loosening the bottles and screening out the dirt, sand, soil from bottles;
installed before label separation unit.
Zigzag Label & Dust Separator
used to sucking out the label flake remain and fine dust from finished product;
installed before collecting silo.
  Â
MEB-Series Plastic Bottle HDPE Recycling Machine
Model NO.: MEB Series HDPE Recycling Machine
Material: Baled or Loose HDPE/PE/PP Bottles
Material of Washing Part: Stainless Steel (Thickness: 3mm)
Bearing Brand: Hrb (Top Brand in China)
Reducer Brand: Changzhou Guomao (Famous Brand in China)
Motor Brand: Siemens (Made in China)
Invertor Brand: Teco (Made in Taiwan)
Contactor Brand: Siemens or Customized
Finished Product Size: <16mm
Hot Washing: Included in HDPE Recycling Machine
Capacity of HDPE Recycling Machine: >500 Kg Per Hour
Trademark: Mooge Tech.
Specification: CE, SGS
Origin: Zhangjiagang, Jiangsu
HS Code: 8477800000
Model NO.: MEB Series HDPE Recycling Machine
Material: Baled or Loose HDPE/PE/PP Bottles
Material of Washing Part: Stainless Steel (Thickness: 3mm)
Bearing Brand: Hrb (Top Brand in China)
Reducer Brand: Changzhou Guomao (Famous Brand in China)
Motor Brand: Siemens (Made in China)
Invertor Brand: Teco (Made in Taiwan)
Contactor Brand: Siemens or Customized
Finished Product Size: <16mm
Hot Washing: Included in HDPE Recycling Machine
Capacity of HDPE Recycling Machine: >500 Kg Per Hour
Trademark: Mooge Tech.
Specification: CE, SGS
Origin: Zhangjiagang, Jiangsu
HS Code: 8477800000