Flat Vertical Glass Washing Drying Machine Double Glass Washer

Model NO.: Glass washer
Trademark: Eworld
Specification: 1800*2500mm
Origin: China
HS Code: 84752919
Model NO.: Glass washer
Trademark: Eworld
Specification: 1800*2500mm
Origin: China
HS Code: 84752919

Flat Vertical Glass Washing Drying Machine Double GlassWasher

Flat Vertical Glass Washing Drying Machine Double Glass Washer
  1. It is painted by an electrostatic paint for protection against a rust and scratchs.
  2. Heating up plates and the Water tank have a covering (Against a rust of 10 years of a guarantee).
  3. Conic moving gears are made from a special steel alloy.
  4. Nuts corrosion-proof, apertures for nuts aluminium.
  5. A working direction of action with left on the right party.
  6. A water tank with a heater.
  7. Filtered fan for dust-free air expulsion.
  8. Brushes from above and from below have adjustment for approach.
  9. The electrosystem corresponds to safety rules.
  10. The washing branch has 6 brushes. 
 Additional features : 
  1. Heating up plates and water tank from stainless steel.
  2. Special brushes for reflecting glasses.
  3. Adjustment of speed of a running tape.
  4. Covers with glass windows.
  5. Washer and dryer  
  6. LOW-E option /Coating glass washing
  7. Power: 380V 50HZ 3 phase or 3 Phase,220v ,60hz
  8. CE CERTIFICATE for European Union 
2. Air knife drying Description:
Normal temperatures, without the drying button to be opened. Fan drying the glass is mainly used in condition of low temperature (below 0 °) and the humidity of the air (such as rain and snow weather, wet weather) circumstances, which is not good effect caused by these conditions
 
3. The use of materials: section 01 and 03 40 * 80 * 3mm Square steel (Q235B) which is welded together.
 Section 2 are all high-quality stainless steel (304 materials). 4mm thickness shell, and there is 1.5mm thickness stainless steel for six doors. Roof and bottom use 5mm thick stainless steel. And1.5mm thickness stainless steel for water tank. Three pairs of soft brushes (6), can wash the coated glass, LOW-E glass.
 
4.Other materials configuration:
1) All washing section use solid rubber roller,
2) Section 01,02 and 03 respectively controlled by converter (Taiwan Delta) for regulating the washing speed.
3) The high-pressure blower fan. Circulating air can be heated, air knives and prop material adopt all model 304 stainless steel frame.
4) Using two circulating water filtration devices, also can be heated.
5) Bearings from domestic well-known brands: Harbin Bearing
Technical parameter
Model  Max Glass(mm) Min Glass(mm) Glass Thickness(mm) Washing Speed Power Dimension(mm)
2500 2500*3500 300*500 3-15 0-8m/min 380v/50HZ 38KW 9200*2600*2800
2200  2200*3000  300*500  3-15  0-8m/min  380v 50HZ 25kw  8500*2300*2600
2000 2000*3000 300*500 3-15 0-8m/min   8000*2300*2600
1800  1800*2500  300*500  3-15  0-8m/min 380v 50HZ 21kw  6800*2300*2500
1600G  1600*2500   300*500  3-15   0-6m/min  380v 50HZ 13kw  6000*2200*2500
Flat Vertical Glass Washing Drying Machine Double Glass Washer

Flat Vertical Glass Washing Drying Machine Double Glass Washer
Flat Vertical Glass Washing Drying Machine Double Glass Washer
Flat Vertical Glass Washing Drying Machine Double Glass Washer
Flat Vertical Glass Washing Drying Machine Double Glass Washer

 

Flat Vertical Glass Washing Drying Machine Double GlassWasher

Flat Vertical Glass Washing Drying Machine Double Glass Washer
  1. It is painted by an electrostatic paint for protection against a rust and scratchs.
  2. Heating up plates and the Water tank have a covering (Against a rust of 10 years of a guarantee).
  3. Conic moving gears are made from a special steel alloy.
  4. Nuts corrosion-proof, apertures for nuts aluminium.
  5. A working direction of action with left on the right party.
  6. A water tank with a heater.
  7. Filtered fan for dust-free air expulsion.
  8. Brushes from above and from below have adjustment for approach.
  9. The electrosystem corresponds to safety rules.
  10. The washing branch has 6 brushes. 
 Additional features : 
  1. Heating up plates and water tank from stainless steel.
  2. Special brushes for reflecting glasses.
  3. Adjustment of speed of a running tape.
  4. Covers with glass windows.
  5. Washer and dryer  
  6. LOW-E option /Coating glass washing
  7. Power: 380V 50HZ 3 phase or 3 Phase,220v ,60hz
  8. CE CERTIFICATE for European Union 
2. Air knife drying Description:
Normal temperatures, without the drying button to be opened. Fan drying the glass is mainly used in condition of low temperature (below 0 °) and the humidity of the air (such as rain and snow weather, wet weather) circumstances, which is not good effect caused by these conditions
 
3. The use of materials: section 01 and 03 40 * 80 * 3mm Square steel (Q235B) which is welded together.
 Section 2 are all high-quality stainless steel (304 materials). 4mm thickness shell, and there is 1.5mm thickness stainless steel for six doors. Roof and bottom use 5mm thick stainless steel. And1.5mm thickness stainless steel for water tank. Three pairs of soft brushes (6), can wash the coated glass, LOW-E glass.
 
4.Other materials configuration:
1) All washing section use solid rubber roller,
2) Section 01,02 and 03 respectively controlled by converter (Taiwan Delta) for regulating the washing speed.
3) The high-pressure blower fan. Circulating air can be heated, air knives and prop material adopt all model 304 stainless steel frame.
4) Using two circulating water filtration devices, also can be heated.
5) Bearings from domestic well-known brands: Harbin Bearing
Technical parameter
Model  Max Glass(mm) Min Glass(mm) Glass Thickness(mm) Washing Speed Power Dimension(mm)
2500 2500*3500 300*500 3-15 0-8m/min 380v/50HZ 38KW 9200*2600*2800
2200  2200*3000  300*500  3-15  0-8m/min  380v 50HZ 25kw  8500*2300*2600
2000 2000*3000 300*500 3-15 0-8m/min   8000*2300*2600
1800  1800*2500  300*500  3-15  0-8m/min 380v 50HZ 21kw  6800*2300*2500
1600G  1600*2500   300*500  3-15   0-6m/min  380v 50HZ 13kw  6000*2200*2500
Flat Vertical Glass Washing Drying Machine Double Glass Washer

Flat Vertical Glass Washing Drying Machine Double Glass Washer
Flat Vertical Glass Washing Drying Machine Double Glass Washer
Flat Vertical Glass Washing Drying Machine Double Glass Washer
Flat Vertical Glass Washing Drying Machine Double Glass Washer

 

Mainly to remove the large margin and lay the foundation for the subsequent sequence of precision, the process requires milling the inner contour according to the part structure diagram shown, and pre-finishing the reference hole required for the precision. The aluminum alloy parts are precision-selected with the center hole as the reference hole, and the center hole is boring after the outer circle of the lathe, and the reference hole must be completed before the precision cavity.

Aluminium CNC Milling

Cnc Milling Acrylic Block,Milling Machining Parts,Oem Milling Machining Parts

Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com