Autoclave Aerated Lightweight Block Making Machine

July 05, 2020

Model NO.: Autoclave Aerated Lightweight Brick Making Machine
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: HONGFA
Transport Package: Seaworthing Packing
Origin: Nanning Guangxi China
HS Code: 8474802000
AAC Block  Manufacturer Aerated Concrete Block Making Machine

High technology for AAC:
1.500kg/m3,600kg/m3,700kg/m3
2.Raw material :sand or fly ash
3.Its weight is 1/4 concrete
4.ISO/CE

1.light weight .Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and  1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
2.keeping temperature .It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as  1/4 or 1/5 of clay brick,so it is best  materials now in the world.

AAC light weight block machine 
 
1. Product weight is according to 600kg/m3 to control. 2. water and material rate 0.631
3 .annual capacity 200,000M3.  
4. one mould product 2.88M3
5. Set raw  material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3. 6. Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
7.casting slurry temperature 38-42 degree 8 .body quiet stop. Time is 1.5-2.5housr, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa
9 .Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours. 10. Main Material:coal ash sand waste mine material coal stonestone dust and other silicon materials.


Hongfa AAC Introduction:

1.Our company has set up office in Vietnam,Indonesia,South Africa  and sale service station in nanning guangxi province and will ensure the matericals rapid and timely service.

2.We have successfully exported and established more than 10 sets of AAC concrete production lines in overseas.So,we have many type of business model in other countries,such as Indonesia,Myanmar,Iraq,Mongolia.You can pay a visitting to these countries and see our successful molds whenever you fell free.

3.Hongfa Machinery are the best manufactuer in producing aerated block and concrete block molding machine in China,as weFamous Trademark of China,and One of Top Ten Influential Brands in China Brick & Tile Industry.Please see the following Hongfa'Honor,and you will have a better undstanding to our company.
 
4.We have mature and rice experience to successfully help customers establish aerated concrete walls manufactuer.If you buy one set line of AAC from our company,we will give you a valued project report and detailed instrution.

Advantages of the AAC brock application
 
1. Sound proof
AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors
 
2. Thermal Insulation
It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters. AAC reduces Air conditioning cost by 30%.
 
3. Earthquake Resistant
Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.
 
4. Floor Space Area
Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.
 
5. Cost saving
Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving. Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.
 
Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).
 
6. Fire Resistant
Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.
 
7. Pest Resistant Termites hate AAC!
Being made of inorganic minerals, it does not promote growth of molds.
 
8. Water Barrier
Its structure does not allow for capillary action making it impervious to water. Its water barrier properties are further enhanced by adding silicone based additives.
 
Strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements.
 
9. Energy Efficient
AAC is 100% Green Building Material & is a walling material of choice in LEED certified buildings (ITC centre, the highest rated Green Building has been built using AAC).AAC is most energy & resource efficient in the sense that it uses least amount of energy & material per m³ of product. Unlike brick manufacturing process which uses previous top layer agricultural soil, AAC uses Fly Ash (65% of its weight), thus provides the most constructive solution to the nation's fly ash utilization problem.

FAQ
Shipping port: Qingdao or Fangcheng Port China.
Payment:30% as down deposit by T/T ,70% as the balance paid before loading 
Guarantee Period: One year after installation finished at buyer's factory.
The above price includes one mold for free, extra molds should be paid according to design.
The video is available to send to you, please contact me.

Package & Delivery
Packing: Naked packing or stretch film packing or according to customers' requirements
Delivery time: Within 30 days after receipt of deposit and moulds confirmation from buyer 

Aftersale service 
Guarantee for three year and after sale service for whole life.To offer free design,free technology support and free machine maintenance trainning. 
We will provide you with a set of spare parts for free!

Guangxi Hongfa Heavy Machinery Group

 Guangxi Hongfa Heavy Machinery Group was established in 1990, is one of the largest block making manufacturer and leading supplier of the building block industry in China,as an ISO9001-2000 certificate and "Famous Brand in Guangxi"enterprise and member of China Building Block  Association.   

Hongfa Machinery'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.China National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Technology Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit

Exhibitions & cooperations

Hongfa, as a top brand enterprise in China, our products are also exported to Russia, Brazil, Thailand, Indonesia, Vietnam, Angola, Bangladesh, India, Australia, Sudan, etc., 96 countries and regions, deeply welcomed by clients from all around the world.

Hongfa Machinery Group Main Products :
Main products: Concrete mixing plant,mixer, concrete block making machine,concrete tile making machine and concrete pipe making machine  .
Automatic Block Making:
QT12-15D   QT12-15  QT10-15D  QT10-15  QT9-15 QT8-15D 
QT8-15B  QT6-15D  QT6-15C  QT6-15B  QT4-15D  QT4-15C 
QT4-15B  QT4-20C  QTJ4-25
Semi-automatic:
QTJ4-35B2  QTJ4-40B2
Semi-automatic egg-laying machine:
QTY4-30  QMJ4-45  QTJ2-45  JMQ-6A 
Color Paver Color tile forming machine:
QT3-20   SMY8-150
HF-800 pipe-making machine  HF-2000 pipe-making machine
Concrete Mixing Plant:
HZS25  HZS35    HZS50  HZS60  HZS series
AAC Block production line : 50000~300000M3/Year

When you plan to purchase a certain machine, suggesting to take care below points:
 1. What is the brand? ( Now a lot companies embezzle our brand, pls take note our  prevention fake-mark.)
 2. Does this brand has good reputation and sell well in the market?(we got good reputation and are the biggest supplier in China)
 3. What is the materials they used? Manganese steel or A3 steel? (We use Manganese steel which stronger than A3 steel)
4. What is the lifetime of the mold? ( our mold can use 900,000 - 1200,000 times)
5. What is the capacity of this machine? (17280-23040 pcs/8 hours hollow brick)
6.What is the guarantee period? ( We guarantee for one year)
7.The price cover to what equipment?( pls refer to our quotation list)
Please not hesitate to contact us if you are interested in any kinds of products.

Contact Information:
Foreign Trade Dept. :Wendy Deng
Guangxi Hongfa Heavy Machinery Co., Ltd.
Wesite: www.gxhongfa.cn

Laser Metal Sheet Cutting Machines

Laser Metal Sheet Cutting Machines,Laser Cutting Machine Metal,Sheet Metal Laser Cutting,Laser Cutting Equipment

Jinan Bodor CNC Machine Co., Ltd. , https://www.lasercuttings.nl