Input:60HZ-7200V/50HZ-6000V;
First output voltage:500V-3000V; Second
output voltage:60HZ-460V/50HZ-380V
The device is based on the principle of electromagnetic induction to change the AC voltage. The main components are primary coils, secondary coils and cores. The main functions are: voltage transformation, current transformation, impedance transformation, isolation, voltage stabilizing (magnetic saturation transformer) and so on. It can be divided into power transformers and special transformers (electric transformer, rectifier and transformer, power frequency transformer, voltage regulator, mine change, audio transformer, intermediate frequency transformer, high-frequency transformer, shock transformer, transformer, transformer, reactor, intersenser, etc.).
Transformer Transformer,Instrument Transformer,Current Sensor,Power Cable Tianjin RongHeng Group LLC , https://www.wholesale-water-pump.com
1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
Â
NO.
PART
MATERIAL
1
Body
Ductile Iron
2
Seat
EPDM
3
Shaft
Stainless steel 420
4
Disc
Ductile Iron
5
Wedge Nut
Brass
6
Bonnet
Ductile Iron
7
O ring
EPDM
8
Thrust ring
Brass
9
sealing ring
EPDM
10
socket head screw
Carbon Steel
11
O ring
EPDM
12
Hand wheel
Ductile Iron
13
Stem Nut
Brass
Â
DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.
1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
Â
NO.
PART
MATERIAL
1
Body
Ductile Iron
2
Seat
EPDM
3
Shaft
Stainless steel 420
4
Disc
Ductile Iron
5
Wedge Nut
Brass
6
Bonnet
Ductile Iron
7
O ring
EPDM
8
Thrust ring
Brass
9
sealing ring
EPDM
10
socket head screw
Carbon Steel
11
O ring
EPDM
12
Hand wheel
Ductile Iron
13
Stem Nut
Brass
Â
BS5163 Pn16 Ggg50 Cast Iron Non-Rising Stem Type Gate Valve
Model NO.: G-001
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Industrial Usage, Water Industrial Usage
Size: Dn50-Dn2000
Trademark: TFW
Transport Package: Plywood Case
Specification: CE
Origin: Tianjin China
HS Code: 84818040
Model NO.: G-001
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Industrial Usage, Water Industrial Usage
Size: Dn50-Dn2000
Trademark: TFW
Transport Package: Plywood Case
Specification: CE
Origin: Tianjin China
HS Code: 84818040
DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.