Servo Energy Saving Injection Molding Machine Servo energy saving injection molding machine output power changes with the loading changing. There's no extra waste of power. The motor doesn't work while cooling, electricity consumption is 0. As compared with the tradition injection molding machine, the servo machine can save electricity 20%-80% that brings you excellent profit. As compared with the traditional fixed pump injection molding machine, it saves energy 20%-80% under the same working condition. The pressure and flow of servo drive system applies closed-loop control, as compared with the traditional injection molding machine, it greatly increases repeatability precision of injection molding. Fast response servo drive, the start time faster than that of the traditional injection molding machine by 50%. The complete machine runs under low noisy, low speed operation and quite. The servo motor output hydraulic oil according to proportion to avoid extra heat. Even the hydraulic oil need not to be cooled to realize excellent water saving. 6800 is a Deep Groove Ball Bearing type bearings international standards, 6800 series bearings are deep groove ball bearings, inner diameter (d) is 10mm, outer diameter (D) is 26mm, thickness (B) is 8mm. 6800 series deep groove ball bearings are made of bearing steel, stainless steel, carbon steel, ceramic, plastic, etc., Deep groove ball bearings is mainly used for construction machinery, packaging machinery, wheel lathe, gear cutting machine, high-altitude operation platform, electroantennogram, metallurgy, inverter, broaching machine for bush, car lights and other equipment. Deep Groove Ball Bearing 6800 Series Deep Groove Ball Bearing 6800 Series,Ball Bearing Turbo,Ball Bearing Hinges,Ball Bearing Swivels NINGBO FANGXING IMPORT& EXPORT CO.,LTD. , https://www.fxbearings.com
-Excellent energy saving
-Excellent injection molding stability
-Fast response
-Environmental friendly
-Constant oil temperature
Ningbo Kingway Machinery Co., Ltd Technical parameter
Item
 Unit     Model
KW138
Injection unit
Screw type
/
A
B
C
Screw diameter
mm
38
40
42
Shot volume(theoritical)
cm 3
244
270
298
Injection weight (PS)
g
220
240
265
Injection rate
g/s
108
125
130
Injection pressure
Mpa
176
158
143
Screw rotation speedÂ
r.p.m
200
Clamping unit
Clamping force
KN
1380
Open stroke
mm
370
Space between tie bars(W*H)
mm
425*405
Max. mould height
mm
460
Min. mould height
mm
170
Ejector stroke
mm
120
Ejector force
KN
33
Others
Max. Pump pressure
Mpa
14
Pump motor power
KW
11
Heating power
KW
7.7
Machine dimension(L*W*H)
m
4.9*1.25*1.85
Machine weightÂ
t
4
Servo Energy Saving Injection Molding Machine for Thin Walled Parts
Â