(EPS Sandwich Wall Panel Production Machine Line) Product description: Parameters of EPS Sandwich Wall Panel Making Machine: Components of the whole production line:  1. Decoiler (1)Inner Diameter: Φ508 - Φ610 mm (3)Max. Loading Capacity: 5000 kgs a.Glue section (1) Numbers of pump: 4 sets (top and bottom each 2) (2) Driven power: 0.37KW (3) Flow volume of glue: 0~0.4 kg per pump (4) Type of flow volume control: Change frequency (5) Scale of glue: (white): (Black) 1.5 (6)Gule name: PUA and PUB (7)Speed of spreading:80times/min (8)Driven power:0.5KW x 3 b.Apply Guard Film: (1) Type of apply guard film: Automatic c. Grooving formingdevice (1) Grooving: according to the design requirement (2) Depth of groove: 0.5~1.0mm d. EPS grooving cutter and EPSwaste collector (1) Type of cutting: electrical heat cutting (2) Numbers of heater: 3 (3) Power of heater: 2.5kw×6 (4) Driven power:0.75KW (5) Type of collecting: Vacuum (6) Driven power:2.2kw e. Sandwich panel cutting device (1)Material:EPS (2) Type of cutting:shearing cutter (3) Driven power: 1.5kw×2 (4) Thickness of panel: 40-300mm (5) Length of panel: 1200~30000mm (6) Movement of cutter:1800mm(cylinder distance) (7) Type of operating:touch screen f. Electrical system: (1)Electrical Voltage:380V/3Ph/50Hz (2)Type of controlling: PLC (Delta,Taiwan) (3) Encorder: Omron Marketing Department Add : Botou Golden Intergrity Roll Forming Machine Co., Ltd Nancang Street, Botou City,Hebei Province,ChinaZIP:062150 Call : +86 18331794415   (EPS Sandwich Wall Panel Production Machine Line) Product description: Parameters of EPS Sandwich Wall Panel Making Machine: Components of the whole production line:  1. Decoiler (1)Inner Diameter: Φ508 - Φ610 mm (3)Max. Loading Capacity: 5000 kgs a.Glue section (1) Numbers of pump: 4 sets (top and bottom each 2) (2) Driven power: 0.37KW (3) Flow volume of glue: 0~0.4 kg per pump (4) Type of flow volume control: Change frequency (5) Scale of glue: (white): (Black) 1.5 (6)Gule name: PUA and PUB (7)Speed of spreading:80times/min (8)Driven power:0.5KW x 3 b.Apply Guard Film: (1) Type of apply guard film: Automatic c. Grooving formingdevice (1) Grooving: according to the design requirement (2) Depth of groove: 0.5~1.0mm d. EPS grooving cutter and EPSwaste collector (1) Type of cutting: electrical heat cutting (2) Numbers of heater: 3 (3) Power of heater: 2.5kw×6 (4) Driven power:0.75KW (5) Type of collecting: Vacuum (6) Driven power:2.2kw e. Sandwich panel cutting device (1)Material:EPS (2) Type of cutting:shearing cutter (3) Driven power: 1.5kw×2 (4) Thickness of panel: 40-300mm (5) Length of panel: 1200~30000mm (6) Movement of cutter:1800mm(cylinder distance) (7) Type of operating:touch screen f. Electrical system: (1)Electrical Voltage:380V/3Ph/50Hz (2)Type of controlling: PLC (Delta,Taiwan) (3) Encorder: Omron Marketing Department Add : Botou Golden Intergrity Roll Forming Machine Co., Ltd Nancang Street, Botou City,Hebei Province,ChinaZIP:062150 Call : +86 18331794415   One-piece Desktop Pneumatic Marking Machine One-Piece Desktop Pneumatic Marking Machine,Desktop Pneumatic Marking Machine,Desktop Benchtop Pneumatic Pipe Marking Machine,Desktop Pneumatic Dot Peen Marking Machine Jinan Luyue CNC Equipment Co., Ltd. , https://www.sdlycnc.com
     Sandwich panel production line is used for the special purpose of producing the new type constructional material (Sandwich panel), with the function of compounding EPS or Rock wool board to the color steel sheets. Â
Sandwich panel is very light weight. (1/40 to 1/10 of common brick).It is high strength, warm conservation, water proof, convenient for construction, short construction period etc. Â
  As the ideal constructional material, they can be used to build warehouses, workshops, wide range roofing, air-conditioned houses and so on.
Parameters of EPS Sandwich Wall Panel Making Machine:
 
Profile drawing of EPS Sandwich Wall Panel Making Machine:
No.
Item
Description
1
Measurements:
25,000×3,520×2,800 mm
2
Weight:
13Â T
3
Control System:
OMRON Coding System
4
Main Engine:
Cycloid Pinwheel Reducer
5
Production Speed:
0-3.5m / min
6
Types of Finished Products:
EPS flat board; EPS matchboard;980 matchboard
7
Voltage:
380V,50HZ,3Phase
8
Component Parts:
Uncoiler + roll forming machine + compounding machine + cutting machine + delivery rackÂ
9
Cutting Methods:
Hydraulic cutting (milling cutter/click-die cutter)
10
Roller's Material:
Made of #45 steel, chrome plated
11
Overall Power:
28kw
12
Synchronous controller:
KMD04B Synchronous controller
13
Motor for roll forming machine
Double polar cycloid reducer
14
Number of Electrical Motor:
26
15
Number of Heating Pipe:
6.2 kw per pipe
16
Packing Way:
Anti rust
17
Products Application:
Roofing, Walling
The sketch map of EPS Sandwich Wall Panel Making Machine:
No.
Name
Parameters
1
Composite De-coiler
1
2
Main Machine For forming machine
1
3
Main Machine For Compositing
1
4
Control System(PLC)
1
5
Cutting System
1
6
Run out table
1
(2)Out Diameter: 1250mm
(4)Type:manual
2. Roof sheet machine (double layer):
3.Glue section
Our service:
1. We provide the technical support for whole life.
2. Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.Â
3. When need the technician to go abroad, we will arrange the technician.
Contactor:
Amy Zhao
     Sandwich panel production line is used for the special purpose of producing the new type constructional material (Sandwich panel), with the function of compounding EPS or Rock wool board to the color steel sheets. Â
Sandwich panel is very light weight. (1/40 to 1/10 of common brick).It is high strength, warm conservation, water proof, convenient for construction, short construction period etc. Â
  As the ideal constructional material, they can be used to build warehouses, workshops, wide range roofing, air-conditioned houses and so on.
Parameters of EPS Sandwich Wall Panel Making Machine:
Â
Profile drawing of EPS Sandwich Wall Panel Making Machine:
No.
Item
Description
1
Measurements:
25,000×3,520×2,800 mm
2
Weight:
13Â T
3
Control System:
OMRON Coding System
4
Main Engine:
Cycloid Pinwheel Reducer
5
Production Speed:
0-3.5m / min
6
Types of Finished Products:
EPS flat board; EPS matchboard;980 matchboard
7
Voltage:
380V,50HZ,3Phase
8
Component Parts:
Uncoiler + roll forming machine + compounding machine + cutting machine + delivery rackÂ
9
Cutting Methods:
Hydraulic cutting (milling cutter/click-die cutter)
10
Roller's Material:
Made of #45 steel, chrome plated
11
Overall Power:
28kw
12
Synchronous controller:
KMD04B Synchronous controller
13
Motor for roll forming machine
Double polar cycloid reducer
14
Number of Electrical Motor:
26
15
Number of Heating Pipe:
6.2 kw per pipe
16
Packing Way:
Anti rust
17
Products Application:
Roofing, Walling
The sketch map of EPS Sandwich Wall Panel Making Machine:
No.
Name
Parameters
1
Composite De-coiler
1
2
Main Machine For forming machine
1
3
Main Machine For Compositing
1
4
Control System(PLC)
1
5
Cutting System
1
6
Run out table
1
(2)Out Diameter: 1250mm
(4)Type:manual
2. Roof sheet machine (double layer):
3.Glue section
Our service:
1. We provide the technical support for whole life.
2. Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.Â
3. When need the technician to go abroad, we will arrange the technician.
Contactor:
Amy Zhao
One-piece desktop pneumatic marking machine is the original bench marking machine marking machine of motion control and marking machine head together, at the same time to embed the mini touch computer marking machine, pneumatic marking machine only external all-in-one desktop power supply and air supply can work normally, save the original data cable. All-in-one desktop pneumatic marking machines, more concise, convenient and practical.
The two-dimensional worktable of this model is made of precision mold. The original linear guide rail can realize self-lubrication and self-sealing, which can ensure the accuracy as before after working for a long time. The marking precision is high and durable. The structure of the lifting column type guide rail is stable and firm.
Integrated desktop pneumatic marking machine can be used for steel, copper, iron, aluminum, alloy, plastic and other metal and non-metal nameplate parts plane and cylindrical workpiece marking, widely used in auto parts, mechanical equipment, flanges, electrical equipment, metal pipe parts and other fields.
EPS Sandwich Wall Panel Making Machine
Model NO.: EPS Sandwich Wall Panel Making Machine
The Total Weight About The Machine: 40 Tons
Measurement: 45000*2500*2600mm
Product Thickness: 40-250mm
Raw Material Thickness: 0.45X1200mm
Raw Material: (Under Side) Color Steel, PVC, Aluminized Paper
Voltage: 380V/50~60Hz, 3phases
Total Power: About 30kw
Type: Roof Forming Machine
Method: Hydraulic Pressure
Processing: CNC Lathe
Trademark: jcx
Transport Package: According to Customers′ Request
Specification: EPS Sandwich Wall Panel Forming Machine
Origin: Hebei China
HS Code: 8455221000
Model NO.: EPS Sandwich Wall Panel Making Machine
The Total Weight About The Machine: 40 Tons
Measurement: 45000*2500*2600mm
Product Thickness: 40-250mm
Raw Material Thickness: 0.45X1200mm
Raw Material: (Under Side) Color Steel, PVC, Aluminized Paper
Voltage: 380V/50~60Hz, 3phases
Total Power: About 30kw
Type: Roof Forming Machine
Method: Hydraulic Pressure
Processing: CNC Lathe
Trademark: jcx
Transport Package: According to Customers′ Request
Specification: EPS Sandwich Wall Panel Forming Machine
Origin: Hebei China
HS Code: 8455221000
              EPS Sandwich Wall Panel Making Machine