A. Technical service B. After-sales service
The Three Dimensional Mixer(high efficiency three dimensional mixer) is wide used in food and Pharmaceutical Industry. Its loading index can be 80%. The mixing homogeniety can be 99.9%
SYH 3d powder mixer mixer is extensively applied in l pharmaceutical chemical, food, and light industry. The machine can be very evenly mixed good fluidity powder or granular materials. During the work, mixing tank moves multi-directional, which accelerated the flow and diffusion of material in the process of mixing various kinds of material. Furthermore, it can avoid Specific gravity and accumulation of segregation due to the centrifugal force. Therefore excellent mixing effect can be obtained.
Characteristic
1: SYH three dimensional mixers are mainly composed of engine base, transmission system, electrical control system, multi-directional movement mechanism, and mixing buckets. Moreover, The parts access to material is made of high quality stainless steel and the inner and outer surface adopt mirror polished.
2: With the multi-directional movement of mixing tank, the material in the mixing tank can attain excellent mixing effect and mixing uniformity is better than the general mixer.
3: Mixing barrel shape is well designed with inner and outer polished surface, no dead corner, no accumulation material. In addition, the materials are discharged smoothly and the machine is easy to clean.
4: The materials were mixed in a closed state so that it does not cause pollution.
Three Dimensional Mixer Three Dimensional Mixer, Three Dimensional Swing Mixer, Three Dimensional Mixing Machine Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com
KINKAI Heat pump dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
Â
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final incense will be dried by the hot air circulating in drying chamber
Features of KINKAI Incense Drying Machine:
1, Energy saving and environment protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.
3, Second waste heat recovery technology(patent)
   Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4, Accurate control temperature and humidity
   According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.
5, Horizontal Blowing 360ºC
   By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.
6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time
Technical Parameters
Single Dryer + Drying Chamber
Model
Unit
JK03RD
JK06RD
JK12RD
Power Input
KW
4.8
8.5
15
Power Supply
V/PH/HZ
380V/3PH, 50/60HZ
380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current
A
9.6A(380V), 22A(220V)
17
30
Heating Capacity
KW
10.5
21
42
Cooling Capacity
KW
7.8
18
32
Dehumidify
L/H
12
25
50
Max. Temperature
ºC
≤75
≤75
≤75
Working Condition
ºC
0-43
0-43
0-43
Electric Shock Protection Grade
I
I
I
Max. Exhause Pressure
Mpa
3
3
3
Noise
dB(A)
75
75
75
Power Consumption/ H
KWH
4.8
8.5
15
Electric Heater
KW
3
6
12
Blowing Type
/
Horizontal Blowing 360ºC
Dimension Of Dryer
MM
1675x860x1280
1760x1060x1280
2120x1360x1590
Weight
KG
295
385
540
Double Dryers + Drying Chamber
Model
Unit
JK03RD (x2)
JK06RD (x2)
JK12RD (x2)
Power Input
KW
9.6
17
30
Power Supply
V/PH/HZ
380V/3PH, 50/60HZ
380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current
A
19.2A(380V), 44A(220V)
34
60
Heating Capacity
KW
21
42
84
Cooling Capacity
KW
15.6
36
64
Dehumidify
L/H
24
50
100
Max. Temperature
ºC
≤75
≤75
≤75
Working Condition
ºC
0-43
0-43
0-43
Electric Shock Protection Grade
I
I
I
Max. Exhause Pressure
Mpa
3
3
3
Noise
dB(A)
≤75
≤75
≤75
Power Consumption/ H
KWH
9.6
17
30
Electric Heater
KW
6
12
24
Blowing Type
/
Horizontal Blowing 360ºC
Dimension Of Dryer
MM
1675x860x1280
1760x1060x1280
2120x1360x1590
Weight
KG
295x2
385x2
540x2
Our Company
Package and Delivery
For heat pump dryer parts---with plywood
For drying chamber +trolleys
 If shipped with 20ft container or 40ft container, no packing
 If shipped with LCL( less than container load), packed in plywood
Our Service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
1, Technical support for your installation, operation and maintenance.Â
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
Â
Heat Pump Batch Dryer Type Incense Drying Machine
Model NO.: JK12RD
Dryer Type: Heat Pump Dryer+Drying Chamber
Drying Type: Hot Air Circulating
Drying Temperature: 10~75c
Heating Capacity: 12kw / 26kw /42kw
Cooling Capacity: 7.5kw / 20kw / 32kw
Dehumidify Amount: 12~100L/H
Control: PLC Automatic Control
Trademark: KINKAI
Transport Package: Plywood
Specification: 2120x1360x1590mm
Origin: China
HS Code: 8419310000
KINKAI Heat Pump Incense Drying Machine Introduction