Cardan Shaft and Drive Shaft for Tj-265454656

April 04, 2020

Model NO.: TJ-265454656
Auto: Automatic
OEM Part.: 98vb3c516ba
The Delivery Time: 30-45days
Model No.: Tj-265454656
Trademark: TJ
Transport Package: Carton, Pallet
Specification: TS16949
Origin: China
HS Code: 8483600090
Model NO.: TJ-265454656
Auto: Automatic
OEM Part.: 98vb3c516ba
The Delivery Time: 30-45days
Model No.: Tj-265454656
Trademark: TJ
Transport Package: Carton, Pallet
Specification: TS16949
Origin: China
HS Code: 8483600090
Certification: ISO9001,TS16949.
Size: Normal Size.
The Payments:  T/T , 30% in advance,balance before shipment.
MOQ:   100 pcs
The delivery time:   30-45days
Packaging Details:  Standard packing or according to the requirements.


A drive shaft, driveshaft, driving shaft, propeller shaft (prop shaft), or Cardan shaft is a mechanical

component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.

As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.
To allow for variations in the alignment and distance between the driving and driven components, drive shafts frequently incorporate one or more universal joints, jaw couplings, or rag joints, and sometimes a splined joint or prismatic joint.

Most of these vehicles have a clutch and gearbox (or transmission) mounted directly on the engine with a drive shaft leading to a final drive in the rear axle. When the vehicle is stationary, the drive shaft does not rotate. A few, mostly sports, cars seeking improved weight balance between front and rear, and most commonly Alfa Romeos or Porsche 924s, have instead used a rear-mounted transaxle. This places the clutch and transmission at the rear of the car and the drive shaft between them and the engine. In this case the drive shaft rotates continuously as long as the engine does, even when the car is stationary and out of gear.
 
Certification: ISO9001,TS16949.
Size: Normal Size.
The Payments:  T/T , 30% in advance,balance before shipment.
MOQ:   100 pcs
The delivery time:   30-45days
Packaging Details:  Standard packing or according to the requirements.


A drive shaft, driveshaft, driving shaft, propeller shaft (prop shaft), or Cardan shaft is a mechanical

component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.

As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.
To allow for variations in the alignment and distance between the driving and driven components, drive shafts frequently incorporate one or more universal joints, jaw couplings, or rag joints, and sometimes a splined joint or prismatic joint.

Most of these vehicles have a clutch and gearbox (or transmission) mounted directly on the engine with a drive shaft leading to a final drive in the rear axle. When the vehicle is stationary, the drive shaft does not rotate. A few, mostly sports, cars seeking improved weight balance between front and rear, and most commonly Alfa Romeos or Porsche 924s, have instead used a rear-mounted transaxle. This places the clutch and transmission at the rear of the car and the drive shaft between them and the engine. In this case the drive shaft rotates continuously as long as the engine does, even when the car is stationary and out of gear.
 

Electric hydraulic portable light weight portable volume small far-light screw steel hand-held Steel Bar Cutting Machine

The steel Bar Cutting Machine is a kind of tool used to shear steel bars.
There are automatic steel cutting machine and semi-automatic steel cutting machine.
It is one of the necessary equipment for steel rebar processing, and it is mainly used to cut off the length of rebar in buildings, Bridges, tunnels, power stations and large water conservancy projects.
Compared with other cutting equipment, steel bar cutting machine has the characteristics of light weight, low energy consumption, reliable operation and high efficiency.
There are automatic steel cutting machine and semi-automatic steel cutting machine.
The fully automatic cutting machine, also called electric cutting machine, is used to control the cutting knife incision through motor transformation into kinetic energy to achieve the effect of shearing steel.
While semi-automatic is manual control of the incision, so shear reinforcement operations.
And more should belong to hydraulic steel bar cutting machine bar cutting machine is divided into charging type and portable two categories.
Electric hydraulic steel bar cutting machine mainly consists of motor, hydraulic transmission system, control device, fixed blade and so on.
Working principle: the motor drives the eccentric shaft to rotate, the eccentric surface of the eccentric shaft to back and forth motion with the plunger in contact with it, so that the plunger pump produces high pressure oil into the cylinder body, drives the piston in the oil cylinder, drives the moving blade forward, and cuts off the steel bar by phase with the fixed blade fixed on the support.
The hydraulic system of manual hydraulic steel bar cutting machine is composed of piston, plunger, hydraulic cylinder, pressure lever, pin pulling, reset spring, oil storage barrel and drain and oil suction valve.

Portable Rebar Cutter

Portable Rebar Cutter,Rebar Cutter,Electric Rebar Cutter,Hydraulic Rebar Cutter

Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com