The current policies and regulations are also biased towards gold power. With the recent joint ministries and commissions strictly supervising the law, the total weight limit for 6×4 tractors has been reduced from 55 tons to 49 tons, and the 6×2 double-axle tractor has 55 tons. To 46 tons. In this load range, for heavy trucks, the 400-490 hp engine can basically meet the daily power demand (ie 8-10 horsepower per ton). Coming soon into the logistics market, the Hongyan Jieshi tractor vehicle with the Cursor 11 engine will become the new benchmark for gold power. Strong power to adapt to a wide range The Cursor11 has the largest displacement in 11L displacement engine products, with more engine reserve power, the highest lifting power, and high-speed driving performance. With a displacement of 11.12L, the Cursor11 engine can be calibrated to cover 4 different power outputs, including 350ps, 390ps, 430ps and 450ps. The corresponding maximum torque can reach 1700N•m, 1900N•m and 2000N•m respectively. With 2100 N•m output, the power performance can be said to cover most of the current heavy-duty truck power demands, and the value of the Cursor11 gold displacement is only reflected in the power distribution. Mature power, big but not blind 1ã€Responsive Cursor11 uses a unique gear transmission technology to reduce energy consumption and achieves the market's requirements for gear response and handling. The cylinder body follows the proven reinforced structure of Fiat Power Technology's C series, which continues the six-cylinder classic design of the four-valve and overhead camshaft to ensure the overall strength of the engine. 2, ultra-low temperature normal start The Cursor11 uses Bosch Bosch's second-generation common-rail system and has Fiat Power Technologies headquarters calibrated to optimize engine combustion. With the Bosch starter motor, the engine can be started as low as minus 30 degrees Celsius, equipped with electronic unit injectors, while eliminating the EGR (whether built-in or external) strategy to ensure the fuel economy and smooth operation. 3, light weight The compact layout of the Cursor11 can effectively reduce the weight of the engine and reduce the space occupation, thereby effectively reducing operating costs and enhancing the user's operating power. Responding to the State V. In the process of going through the five emission standards of the country's four upgrading countries, SAIC-Fiat Hongyan Powertrain Co., Ltd. (abbreviation: Shang Fei Hong) took the opportunity to launch the Cursor 11 engine to further improve the CURSOR series of products. Fiat Power Technologies has more than 25 years of research and development history for SCR (Selective Catalytic Reduction) technology. This leading technology has been applied to 650,000 roads and non-road equipment and has stood the test of the market to ensure its high reliability. Due to the complete abandonment of EGR applications, the combustion efficiency has been significantly improved, and the emission of nitrogen oxides has been reduced, and the National Five standard can be easily achieved. The biggest value of the engine lies in the power output. The Cursor11 has the largest displacement in the 11L displacement engine product, with more engine reserve power, the highest lifting power, and high-speed driving performance. These constitute the excellent performance of Cursor11, a strong and powerful value output, will be a wave of gold power in the market upswing. Drawn Cup Needle Roller Bearings have a deep drawn, thin-walled outer ring. Drawn cup Needle Roller Bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially. Drawn Cup Needle Roller Bearings Drawn Cup Needle Roller Bearings,Drawn Cup Roller Bearings,One Direction Needle Roller Bearings,Drawn Cup Caged Needle Roller Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com
Cursor 11 Engine 
Cursor 11 Engine 
Country V
The drawn cup of hardened steel and the needle roller and cage assembly of these bearÂings form a nonÂ-separable unit.
Bearing features
Low cross section
In applications where less space is available, drawn cup needle Roller Bearings enable downsizing.
High load carrying capacity and stiffness
Due to their large number of rollers, drawn cup needle roller bearings have a high load carrying capacity and stiffness.
Good running properties
Powerful Lightweight Cursor 11 Creates Heavy Truck "Golden Power"
With the development of China's logistics industry in an intensive and efficient direction, China’s heavy-duty engine displacement is developing from 10L and below, and towards the 11L and above trend, heavy trucks with 11L engines will be the “golden power†for China’s future heavy truck market. With the configuration of models, these heavy trucks can be widely used for hazardous chemicals transportation, express delivery, e-commerce, trunk transportation and other purposes.