One light keel forming machine can produce many sizes of purlin .
It deepends on its model, specifications and using, it can be divided into T - ceiling shape, stud and track, omega shape and angle shape.
Specifications:
Pictures for machine:
Training and Installation :
Light Keel Roll Forming Machine Light Keel Roll Forming Machine,Stud Light Keel Forming Machine,Track Light Keel Forming Machine,Omega Light Keel Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
As shown in the above figure, in the wireless monitoring scheme designed by Haishunbo for the workers' stadium, a one-to-many wireless idea with simple cost saving is adopted. Because the monitoring point of the on-site environment directly communicates with the wirelessly shielded environment of the monitoring center, there is an occlusion environment for relaying, and the front-end wireless bridge HS-5868 is installed at each front-end monitoring point. Its built-in directional antenna can provide stable data. Transmission; 2 central equipment HS-5843JZN and HS-5868 wireless bridges are set up at the central station, using the sector characteristics of the external antenna, respectively corresponding to the two monitoring points in the adjacent direction, forming two 1-to-2 wireless chains. road. The two wireless bridges in the center are connected with the center system of the equipment room through the network cable, and finally complete the real-time video transmission of the entire stadium area. 
The line mainly consist of uncoiler , coil sheet guiding device, main roll forming, hydraulic punching, PLC controlling system, servo tracking cutting and support table .
Matching material
Galvanized coils, Pre-painted coils, Aliminum coils
Matetial thickness range
0.3-0.8mm
Rollers
15+7 rows
Material of rollers
45# steel with chromed
Shaft diameter and material
75mm, 40Cr
Forming speed
0-45m/min(without punching)
Way of cutting
Servo tracking cutting
Material of cutting blade
Cr12 mould steel with quenched treatment
Controlling system
Mitsubishi PLC
Main motor power
15KW
Hydraulic station power
5.5KW
Voltage
380V/3Phase/50Hz or as customer's request
Working process:
Decoiler - Feeding guide - Straightening - Main roll forming machine - PLC control - Hydraulic punching - Servo tracking cutting - Collection table
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantages:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Haishunbo wireless network bridge wireless monitoring program in Inner Mongolia Stadium
Inner Mongolia Stadium Wireless Monitoring Solution