Three maintenance suggestions after the car is soaked to repair; 1. Special reminder: When the vehicle enters the section of accumulated water during driving, the engine and exhaust pipe are likely to cause a flameout state after being flooded. Whether or not there is a second start, the power of the whole car is As a result of power failure, they are heavily wading. Vehicles that are heavily soaked in water must be thoroughly tested, and the engine and the electrical equipment in the vehicle are the key points. Simple repairs can no longer guarantee long-term use, and the original electrical components must be replaced. After the overhaul, all the functions on the car are tested statically, and then the car is tested on the road. After the confirmation, the interior trim can be delivered to the owner. Second, the rain has a certain degree of corrosion, although the body in the production process to do anti-corrosion materials, but after a longer time, the anti-corrosion material has no effect, so you must use fresh water to clean the car Disk to prevent corrosion. Third, after the car is soaked in water, other parts of the car body are also likely to have other faults. Vehicles that have been soaked in water need to be carefully observed when using the vehicle. Once there is a fault, they will be repaired immediately. The car is safe when driving. Fourth, the current car itself, most of them are equipped with electronic products, the entire vehicle is the electronic system of the computer command, the quality of the electronic system work directly affects the safety of the entire body. Fifth, in the test of the owners who have been blisters, the engine is the most important part of the detection of the machinery. The oil leakage is the poor sealing performance of the engine, which will lead to a lot of oil loss. Sixth, vehicles do not soak in water, you need to go to a special car beauty shop to do car interior cleaning, and then use odor disinfection to achieve the best bactericidal effect, ozone disinfection is not harmful to the human body and the car's interior of. Its principle is to produce odor after ionizing air and kill bacteria, viruses and other harmful microorganisms in a short time.
OEM Orders are produced according to customers' sampels or drawings.
Based on many years of rich experience in Slurry Pump manufacturing and
design, NAIPU can undertake OEM customization for the whole set of pump
and various spare parts. The Slurry Pump Spare Parts can be made of
various material according to customer`s requirement, Such as : Alloy
20, Hastelloy Alloy , A 61 and so on.
eg: 1. OEM larege impellers
Materi: High chrome/A05/Cr27,Rubber,Or as you request. This impeller can used in Warman 20/18GY-AHP model pumps
2. OEM E4147 U01
OEM Orders OEM Slurry Pumps,OEM Slurry Pump Part,OEM High Chrome Slurry Pumps Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com
