When it comes to the tip greening sprayer , it is believed that the first use that people think of should be the cleaning of the road surface. It is true that this type of sprayer is mainly used for sanitation operations. Of course, it is occasionally used to water the roadside flowers and plants. . It is the use of such spray trucks that has greatly improved the efficiency of sanitation workers' operations. Nowadays, many farmers also purchase greening sprayers for large-scale irrigation. However, most farmers use green spray trucks. Some knowledge of conservation is not well understood. If it is not properly handled, its useful life may be reduced. This is not worth it! The main implementation of the "three-step" strategy for the maintenance of pointed green-spraying vehicles is to strictly screen water sources. The quality of the water source directly determines the service life of the sprayer. Frequent inhalation of impurities such as stones or silt can easily damage the filter device of the sprayer. Therefore, when choosing a pond or some small ditch for water as a source of water, be sure to carefully immerse all the ends of the suction hoses of the spray truck into the water, especially if the water source is relatively shallow. The second step in the maintenance of the tip greening sprayer is to ensure the vacuum degree of the inlet pipe system. That is to say, when water is sucked, it must be ensured that the inlet pipe system is in a sealed environment. Once the pipeline is damaged or the air enters If you do, you cannot inhale water. Especially in the winter when it is necessary to pay more attention to conservation, after use must remember to put the water pump and all the water out of the pipe, otherwise the weather is relatively cold, then it is possible to completely crack the pump. The third step in the maintenance of the sprayer car is only to pay attention to the regular discharge of sewage. Inhaling different water sources for a long time will inevitably cause some dirt to accumulate inside the tank of the sprinkler. At this time, you can open the sewage pipe to eliminate impurities and dirt, so that you can clearly see the water inside the water tank gradually become clear and you can continue to use, and this conservation can effectively extend the tip green sprayer The service life!
Small size plastic injection moulding machines specially produce high procison mini Plastic Parts with fast response, stable quality.
It is widely used in food packaging industrial like Plastic Spoons, knifes and forks.
And also widely sued for stationary industrial like pens.
Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power.
Small Plastic Parts Making Machines Small Plastic Parts Making Machines,Small Plastic Parts,Small Plastic Parts Mould,Making Injection Molding Machine Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com
